The CubitInterface provides a Python/C++ interface into Cubit. More...

Classes
class	AssemblyItem
	Class to implement assembly tree interface. More...
class	Body
	Defines a body object that mostly parallels Cubit's Body class. More...
class	CFD_BC_Entity
	Class to implement cfd bc data retrieval. More...
class	CubitFailureException
	An exception class to alert the caller when the underlying Cubit function fails. More...
class	Curve
	Defines a curve object that mostly parallels Cubit's RefEdge class. More...
class	Dir
	Defines a direction object. More...
class	Entity
	The base class of all the geometry and mesh types. More...
class	GeomEntity
	The base class for specifically the Geometry types (Body, Surface, etc.) More...
class	InvalidEntityException
	An exception class to alert the caller that an invalid entity was attempted to be used. Likely the user is attempting to use an Entity who's underlying CubitEntity has been deleted. More...
class	InvalidInputException
	An exception class to alert the caller of a function that invalid inputs were entered. More...
class	Loc
	Defines a location object. More...
class	MeshErrorFeedback
	Class to implement mesh command feedback processing. More...
class	Surface
	Defines a surface object that mostly parallels Cubit's RefFace class. More...
class	Vertex
	Defines a vertex object that mostly parallels Cubit's RefVertex class. More...
class	Volume
	Defines a volume object that mostly parallels Cubit's RefVolume class. More...

Functions
System Control and Data
void	set_progress_handler (CubitProgressHandler *progress)
	Register a progress-bar callback handler with Cubit. Deletes the current progress handler if it exists.
CubitProgressHandler *	replace_progress_handler (CubitProgressHandler *progress)
	Register a new progress-bar callback handler with Cubit and return the the previous progress-handler without deleting it.
void	set_cubit_interrupt (bool interrupt)
	This sets the global flag in Cubit that stops all interruptable processes.
void	set_playback_paused_on_error (bool pause)
	Sets whether or not playback is paused when an error occurs.
bool	is_playback_paused_on_error ()
	Gets whether or not playback is paused when an error occurs.
void	pause_playback ()
	Pause playback.
void	stop_playback ()
	Pause playback.
void	resume_playback ()
	resume playback.
bool	is_playback_paused ()
bool	developer_commands_are_enabled ()
	This checks to see whether developer commands are enabled.
CubitBaseInterface *	get_interface (std::string interface_name)
	Get the interface of a given name.
bool	release_interface (CubitBaseInterface *instance)
	Release the interface with the given name.
CubitPluginManager *	plugin_manager ()
void	add_filename_to_recent_file_list (std::string &filename)
	Adds the filename to the recent file list.
std::string	get_version ()
	Get the Cubit version.
std::string	get_revision_date ()
	Get the Cubit revision date.
std::string	get_build_number ()
	Get the Cubit build number.
std::string	get_acis_version ()
	Get the Acis version number.
int	get_acis_version_as_int ()
	Get the Acis version number as an int.
std::string	get_exodus_version ()
	Get the Exodus version number.
std::string	get_meshgems_version ()
	Get the MeshGems version number.
double	get_cubit_digits_setting ()
	Get the Cubit digits setting.
std::string	get_graphics_version ()
	Get the VTK version number.
std::string	get_python_version ()
	get the python version used in cubit
void	print_cmd_options ()
	Used to print the command line options.
bool	is_modified ()
	Get the modified status of the model.
void	set_modified ()
	Set the status of the model (is_modified() is now false). If you modify the model after you set this flag, it will register true.
bool	is_undo_save_needed ()
	Get the status of the model relative to undo checkpointing.
void	set_undo_saved ()
	Set the status of the model relative to undo checkpointin.
bool	is_performing_undo ()
	Check if an undo command is currently being performed.
bool	is_command_echoed ()
	Check the echo flag in cubit.
std::string	get_command_from_history (int command_number)
	Get a specific command from Cubit's command history buffer.
int	get_command_history_count ()
std::string	get_next_command_from_history ()
	Get 'next' command from history buffer.
std::string	get_previous_command_from_history ()
	Get 'previous' command from history buffer.
bool	is_volume_meshable (int volume_id)
	Check if volume is meshable with current scheme.
bool	is_surface_meshable (int surface_id)
	Check if surface is meshable with current scheme.
void	journal_commands (bool state)
	Set the journaling flag in cubit.
bool	is_command_journaled ()
	Check the journaling flag in cubit.
void	write_to_journal (std::string words)
	Write a string to the active journal.
void	override_journal_stream (JournalStreamBase *jnl_stream)
	Override the Journal Stream in CUBIT.
std::string	get_current_journal_file ()
	Gets the current journal file name.
bool	is_working_dir_set ()
	Create BCVizInterface for CompSimUI.
bool	cmd (const char *input_string)
	Pass a command string into Cubit.
bool	cmd_single (const char *input_string)
	Pass a command string into Cubit.
bool	cubit_or_python_cmd (const std::string &input_string)
bool	cubit_or_python_cmds (const std::vector< std::string > &input_strings, std::function< void(const std::string &)> &&history)
bool	cubit_or_python_cmds_as_file (const std::vector< std::string > &input_strings, std::function< void(const std::string &)> &&history)
bool	command_is_python_mode ()
	Gets whether command handling is in python mode.
bool	silent_cmd (const char *input_string)
	Pass a command string into Cubit and have it executed without being verbose at the command prompt.
bool	was_last_cmd_undoable ()
	Report whether the last executed command was undoable.
std::vector< int >	parse_cubit_list (const std::string &type, std::string entity_list_string)
	Parse a Cubit style entity list into a list of integers.
std::vector< std::array< double, 3 > >	parse_locations (const std::string &location_str)
std::string	string_from_id_list (std::vector< int > ids)
	Parse a list of integers into a Cubit style id list. Includes carriage return and line breaks at column 80.
std::string	get_id_string (const std::vector< int > &entity_ids)
	Parse a list of integers into a Cubit style id list. Return string will not include carriage returns or line break.
void	print_raw_help (const char *input_line, int order_dependent, int consecutive_dependent)
	Used to print out help when a ?, & or ! is pressed.
int	get_error_count ()
	Get the number of errors in the current Cubit session.
std::vector< std::string >	get_mesh_error_solutions (int error_code)
	Get the paired list of mesh error solutions and help context cues.
void	complete_filename (std::string &line, int &num_chars, bool &found_quote)
	Get the file completion inside a quote based on files in the current directory. This handles completion of directories as well as filtering on specific types (.jou, .g, .sat, etc.)
Graphics Manipulation and Data
double	get_view_distance ()
	Get the distance from the camera to the model (from - at)
std::array< double, 3 >	get_view_at ()
	Get the camera 'at' point.
std::array< double, 3 >	get_view_from ()
	Get the camera 'from' point.
std::array< double, 3 >	get_view_up ()
	Get the camera 'up' direction.
void	reset_camera ()
	reset the camera in all open windows this includes resetting the view, closing the histogram and color windows and clearing the scalar bar, highlight, and picked entities.
void	flush_graphics ()
	Flush the graphics.
void	clear_drawing_set (const std::string &set_name)
	Clear a named drawing set (this is for mesh preview)
void	unselect_entity (const std::string &entity_type, int entity_id)
	Unselect an entity that is currently selected.
int	get_rubberband_shape ()
	Get the current rubberband select mode.
bool	is_perspective_on ()
	Get the current perspective mode.
bool	is_occlusion_on ()
	Get the current occlusion mode.
bool	is_scale_visibility_on ()
	Get the current scale visibility setting.
bool	is_mesh_visibility_on ()
	Get the current mesh visibility setting.
bool	is_geometry_visibility_on ()
	Get the current geometry visibility setting.
bool	is_select_partial_on ()
	Get the current select partial setting.
int	get_rendering_mode ()
	Get the current rendering mode.
void	set_rendering_mode (int mode)
	Set the current rendering mode.
void	clear_highlight ()
	Clear all entity highlights.
void	clear_preview ()
	Clear preview graphics without affecting other display settings.
void	highlight (const std::string &entity_type, int entity_id)
	Highlight the given entity.
std::vector< int >	get_selected_ids ()
	Get a list of the currently selected ids.
int	get_selected_id (int index)
	Get the selected id based on an index.
std::string	get_selected_type (int index)
	Get the selected type based on an index.
const char *	get_pick_type ()
	Get the current pick type.
void	set_pick_type (const std::string &pick_type, bool silent=false)
	Set the pick type.
void	set_filter_types (int num_types, const std::vector< std::string > filter_types)
	Set the pick filter types.
void	add_filter_type (const std::string &filter_type)
	Add a filter type.
void	remove_filter_type (const std::string &filter_type)
	Remove a filter type.
bool	is_type_filtered (const std::string &filter_type)
	Determine whether a type is filtered.
std::vector< std::string >	get_pick_filters ()
	Get a list of the current pick filters.
void	clear_picked_list ()
	Clear the picked list.
void	step_next_possible_selection ()
	Step to the next possible selection (selected next dialog)
void	step_previous_possible_selection ()
	Step to the previous possible selection (selected next dialog)
void	print_current_selections ()
	Print the current selections.
void	print_currently_selected_entity ()
	Print the current selection.
int	current_selection_count ()
	Get the current count of selected items.
Mesh Query Support
double	get_mesh_edge_length (int edge_id)
	Get the length of a mesh edge.
double	estimate_curve_mesh_size (int curve_id, double percent_capture)
	Return estimated mesh size for a curve such that the sum of edge lengths are within a precentage of the curve length.
double	estimate_curves_mesh_size (const std::string &geometry_type, const std::vector< int > &geom_id, double percent_capture)
	Return estimated mesh size for curves related to an entity such that the sum of edge lengths are within a precentage of the curve length. The smallest size for all curves is returned.
size_t	estimate_morph_tet_element_count (const std::vector< int > &volume_ids, double size, bool keep_void)
	Return estimated tet element count for volumes.
int	estimate_morph_num_procs (const std::vector< int > &volume_ids, double size)
	Return recommended numprocs to run morph on this model at the specified size.
double	get_meshed_volume_or_area (const std::string &geometry_type, std::vector< int > entity_ids)
	Get the total volume/area of a entity's mesh.
int	get_mesh_intervals (const std::string &geometry_type, int entity_id)
	Get the interval count for a specified entity.
double	get_mesh_size (const std::string &geometry_type, int entity_id)
	Get the mesh size for a specified entity.
double	get_requested_mesh_size (const std::string &geometry_type, int id)
	Get the requested mesh size for a specified entity. This returns a size that has been set specifically on the entity and not averaged from parents.
int	has_valid_size (const std::string &geometry_type, int entity_id)
	Get whether an entity has a size. All entities have a size unless the auto sizing is off. If the auto sizing is off, an entity has a size only if it has been set.
bool	auto_size_needs_to_be_calculated ()
	Get whether the auto size needs to be calculated. Calculating the auto size may be expensive on complex models. The auto size may be outdated if the model has changed.
double	get_default_auto_size ()
	Get auto size needs for the current set of geometry.
int	get_requested_mesh_intervals (const std::string &geometry_type, int entity_id)
	Get the interval count for a specified entity as set specifically on that entity.
double	get_auto_size (const std::string &geometry_type, std::vector< int > entity_id_list, double size)
	Get the auto size for a given set of enitities. Note, this does not actually set the interval size on the volumes. It simply returns the size that would be set if an 'size auto factor n' command were issued.
int	get_element_budget (const std::string &element_type, std::vector< int > entity_id_list, int auto_factor)
	Get the element budget based on current size settings for a list of volumes.
std::string	get_exodus_sizing_function_variable_name ()
	Get the exodus sizing function variable name.
std::string	get_exodus_sizing_function_file_name ()
	Get the exodus sizing function file name.
std::string	get_sizing_function_name (const std::string &entity_type, int surface_id)
	Get the sizing function name for a surface or volume.
bool	exodus_sizing_function_file_exists ()
	return whether the exodus sizing funnction file exists
bool	get_vol_sphere_params (std::vector< int > sphere_id_list, int &rad_intervals, int &az_intervals, double &bias, double &fract, int &max_smooth_iterations)
	get the current sphere parameters for a sphere volume
std::string	get_curve_bias_type (int curve_id)
double	get_curve_bias_geometric_factor (int curve_id)
double	get_curve_bias_geometric_factor2 (int curve_id)
double	get_curve_bias_first_interval_length (int curve_id)
double	get_curve_bias_first_interval_fraction (int curve_id)
double	get_curve_bias_fine_size (int curve_id)
double	get_curve_bias_coarse_size (int curve_id)
double	get_curve_bias_first_last_ratio1 (int curve_id)
double	get_curve_bias_first_last_ratio2 (int curve_id)
double	get_curve_bias_last_first_ratio1 (int curve_id)
double	get_curve_bias_last_first_ratio2 (int curve_id)
bool	get_curve_bias_from_start (int curve_id, bool &value)
bool	get_curve_bias_from_start_set (int curve_id)
int	get_curve_bias_start_vertex_id (int curve_id)
double	get_curve_mesh_scheme_curvature (int curve_id)
	Get the curvature mesh scheme value of a curve.
bool	get_curve_mesh_scheme_stretch_values (int curve_id, double &first_size, double &factor, double &last_size, bool &start, int &vertex_id)
std::vector< double >	get_curve_mesh_scheme_pinpoint_locations (int curve_id)
void	get_quality_stats (const std::string &entity_type, std::vector< int > id_list, const std::string &metric_name, double single_threshold, bool use_low_threshold, double low_threshold, double high_threshold, double &min_value, double &max_value, double &mean_value, double &std_value, int &min_element_id, int &max_element_id, std::vector< int > &mesh_list, std::string &element_type, int &bad_group_id, bool make_group=false)
	Get the quality stats for a specified entity.
std::vector< double >	get_elem_quality_stats (const std::string &entity_type, const std::vector< int > id_list, const std::string &metric_name, const double single_threshold, const bool use_low_threshold, const double low_threshold, const double high_threshold, const bool make_group)
	python callable version of the get_quality_stats without pass by reference arguments. All return values are stuffed into a double array
std::vector< double >	get_quality_stats_at_geometry (const std::string &geom_type, const std::string &mesh_type, const std::vector< int > geom_id_list, const int expand_levels, const std::string &metric_name, const double single_threshold, const bool use_low_threshold, const double low_threshold, const double high_threshold, const bool make_group)
	get element quality at a list of geometry entities. Finds all elements with nodes ON/IN the specified geometry and finds the quality of all elements of the specfied element type that are connected. Same arguments and return values as get_elem_quality_stats except a geometry and element type are used as arguments
double	get_quality_value (const std::string &mesh_type, int mesh_id, const std::string &metric_name)
	Get the metric value for a specified mesh entity.
std::vector< double >	get_quality_values (const std::string &mesh_type, std::vector< int > mesh_ids, const std::string &metric_name)
	Get the metric values for specified mesh entities.
std::string	get_mesh_scheme (const std::string &geometry_type, int entity_id)
	Get the mesh scheme for the specified entity.
std::string	get_mesh_scheme_firmness (const std::string &geometry_type, int entity_id)
	Get the mesh scheme firmness for the specified entity.
std::string	get_mesh_interval_firmness (const std::string &geometry_type, int entity_id)
	Get the mesh interval firmness for the specified entity. This may include influence from connected mesh intervals on connected geometry.
std::string	get_requested_mesh_interval_firmness (const std::string &geometry_type, int entity_id)
	Get the mesh interval firmness for the specified entity as set specifically on the entity.
std::string	get_mesh_size_type (const std::string &geometry_type, int entity_id)
	Get the mesh size setting type for the specified entity. This may include influence from attached geometry.
std::string	get_requested_mesh_size_type (const std::string &geometry_type, int entity_id)
	Get the mesh size setting type for the specified entity as set specifically on the entity.
bool	get_tetmesh_proximity_flag (int volume_id)
	Get the proximity flag for tet meshing.
int	get_tetmesh_proximity_layers (int volume_id)
	Get the number of proximity layers for tet meshing. This is the number of layers between close surfaces.
double	get_tetmesh_growth_factor (int volume_id)
	Get the tetmesh growth factor.
bool	get_tetmesh_parallel ()
	Get the parallel flag for tet meshing. Defines whether to use parallel mesher.
int	get_tetmesh_num_anisotropic_layers ()
	Get the number of anisotropic tet layers. Global setting.
int	get_tetmesh_optimization_level ()
	Get the optimization level for tetmeshing. Global setting.
bool	get_tetmesh_insert_mid_nodes ()
	Get the state of the flag to insert midnodes during meshing. Global setting.
bool	get_tetmesh_optimize_mid_nodes ()
	Get the state of the flag to optimize midnodes during meshing. Global setting.
bool	get_tetmesh_optimize_overconstrained_tets ()
	Get the state of the flag to optimize overconstrained tets. Global setting.
bool	get_tetmesh_optimize_overconstrained_edges ()
	Get the state of the flag to optimize overconstrained edges. Global setting.
bool	get_tetmesh_minimize_slivers ()
	Get the state of the flag to minimize sliver tets. Global setting.
bool	get_tetmesh_minimize_interior_points ()
	Get the state of the flag to minimize interior points in tetmesher. Global setting.
bool	get_tetmesh_relax_surface_constraints ()
	Get the state of the flag to relax surface mesh constraints in tetmesher. Global setting.
double	get_mesh_geometry_approximation_angle (std::string geometry_type, int entity_id)
	Get the geometry approximation angle set for tri/tet meshing.
double	get_trimesh_surface_gradation ()
	Get the global surface mesh gradation set for meshing with MeshGems.
double	get_trimesh_volume_gradation ()
	Get the global volume mesh gradation set for meshing with MeshGems.
bool	get_trimesh_use_surface_proximity ()
	Get the global trimesh surface proximity setting with MeshGems.
double	get_trimesh_surface_proximity_ratio ()
	Get the global trimesh surface proximity max aspect ratio setting with MeshGems.
double	get_trimesh_target_min_size (std::string geom_type, int entity_id)
	Get the trimesh target min size for the entity. local setting for surfaces.
bool	get_trimesh_geometry_sizing ()
	Get the global geometry sizing flag for trimesher.
int	get_trimesh_num_anisotropic_layers ()
	Get the global number of anisotropic layers for trimeshing.
bool	get_trimesh_split_overconstrained_edges ()
	Get the global setting for trimesher split over-constrained edges.
int	best_edge_to_collapse_interior_node (int node_id)
	Finds the best edge to collapse this node along to remove the interior node.
double	get_trimesh_tiny_edge_length ()
	Get the global setting for tiny edge length in trimesher.
double	get_trimesh_ridge_angle ()
	Get the global setting for ridge angle in trimesher.
bool	is_meshed (const std::string &geometry_type, int entity_id)
	Determines whether a specified entity is meshed.
bool	is_merged (const std::string &geometry_type, int entity_id)
	Determines whether a specified entity is merged.
std::string	get_smooth_scheme (const std::string &geometry_type, int entity_id)
	Get the smooth scheme for a specified entity.
int	get_hex_count ()
	Get the count of hexes in the model.
int	get_pyramid_count ()
	Get the count of pyramids in the model.
int	get_tet_count ()
	Get the count of tets in the model.
int	get_quad_count ()
	Get the count of quads in the model.
int	get_tri_count ()
	Get the count of tris in the model.
int	get_edge_count ()
	Get the count of edges in the model.
int	get_sphere_count ()
	Get the count of sphere elements in the model.
int	get_wedge_count ()
	Get the count of wedge elements in the model.
int	get_node_count ()
	Get the count of nodes in the model.
int	get_element_count ()
	Get the count of elements in the model.
int	get_volume_element_count (int volume_id)
	Get the count of elements in a volume.
int	get_surface_element_count (int surface_id)
	Get the count of elements in a surface.
bool	volume_contains_tets (int volume_id)
	Determine whether a volume contains tets.
std::vector< int >	get_hex_sheet (int node_id_1, int node_id_2)
	Get the list of hex elements forming a hex sheet through the given two node ids. The nodes must be adjacent in the connectivity of the hex i.e. they form an edge of the hex.
std::string	get_default_element_type ()
	Get the current default setting for the element type that will be used when meshing.
Geometry Query Support
bool	is_visible (const std::string &geometry_type, int entity_id)
	Query visibility for a specific entity.
bool	is_virtual (const std::string &geometry_type, int entity_id)
	Query virtualality for a specific entity.
bool	contains_virtual (const std::string &geometry_type, int entity_id)
	Query virtualality of an entity's children.
std::vector< int >	get_source_surfaces (int volume_id)
	Get a list of a volume's sweep source surfaces.
std::vector< int >	get_target_surfaces (int volume_id)
	Get a list of a volume's sweep target surfaces.
int	get_common_curve_id (int surface_1_id, int surface_2_id)
	Given 2 surfaces, get the common curve id.
int	get_common_vertex_id (int curve_1_id, int curve_2_id)
	Given 2 curves, get the common vertex id.
std::vector< std::vector< double > >	project_unit_square (std::vector< std::vector< double > > pts, int surface_id, int quad_id, int node00_id, int node10_id)
	Given points in a unit square, map them to the given quad using the orientation info, then project them onto the given surface, and return their projected positions.
std::string	get_merge_setting (const std::string &geometry_type, int entity_id)
	Get the merge setting for a specified entity.
std::string	get_curve_type (int curve_id)
	Get the curve type for a specified curve.
std::string	get_surface_type (int surface_id)
	Get the surface type for a specified surface.
std::array< double, 3 >	get_surface_normal (int surface_id)
	Get the surface normal for a specified surface.
std::array< double, 3 >	get_surface_normal_at_coord (int surface_id, std::array< double, 3 >)
	Get the surface normal for a specified surface at a location.
std::array< double, 3 >	get_surface_centroid (int surface_id)
	Get the surface centroid for a specified surface.
std::string	get_surface_sense (int surface_id)
	Get the surface sense for a specified surface.
std::vector< std::string >	get_entity_modeler_engine (const std::string &geometry_type, int entity_id)
	Get the modeler engine type for a specified entity.
std::string	get_default_geometry_engine ()
	Get the name of the default modeler engine.
std::array< double, 10 >	get_bounding_box (const std::string &geometry_type, int entity_id)
	Get the bounding box for a specified entity.
std::array< double, 10 >	get_total_bounding_box (const std::string &geometry_type, std::vector< int > entity_list)
	Get the bounding box for a list of entities.
std::array< double, 15 >	get_tight_bounding_box (const std::string &geometry_type, std::vector< int > entity_list)
	Get the tight bounding box for a list of entities.
double	get_total_volume (std::vector< int > volume_list)
	Get the total volume for a list of volume ids.
std::string	get_entity_name (const std::string &entity_type, int entity_id, bool no_default=false)
	Get the name of a specified entity.
std::vector< std::string >	get_entity_names (const std::string &entity_type, int entity_id, bool no_default=false, bool first_name_only=false)
	same as get_entity_name but includes all name attributes set on the entity, not just the first one (unless first_name_only is set)
bool	set_entity_name (const std::string &entity_type, int entity_id, const std::string &new_name)
	Set the name of a specified entity.
std::array< double, 4 >	get_entity_color (const std::string &entity_type, int entity_id)
	Get the color of a specified entity.
int	get_entity_color_index (const std::string &entity_type, int entity_id)
bool	is_multi_volume (int body_id)
	Query whether a specified body is a multi volume body.
bool	is_sheet_body (int volume_id)
	Query whether a specified volume is a sheet body.
bool	is_interval_count_odd (int surface_id)
	Query whether a specified surface has an odd loop.
bool	is_periodic (const std::string &geometry_type, int entity_id)
	Query whether a specified surface or curve is periodic.
bool	is_surface_planer (int surface_id)
	Query whether a specified surface is planer.
bool	is_surface_planar (int surface_id)
void	get_periodic_data (const std::string &geometry_type, int entity_id, double &returned_interval, std::string &returned_firmness, int &returned_lower_bound, std::string &returned_upper_bound)
	Get the periodic data for a surface or curve.
bool	get_undo_enabled ()
	Query whether undo is currently enabled.
int	number_undo_commands ()
	Query whether there are any undo commands to execute.
std::vector< std::string >	get_aprepro_vars ()
	Gets the current aprepro variable names.
std::string	get_aprepro_value_as_string (std::string variable_name)
	Gets the string value of an aprepro variable.
bool	get_aprepro_value (std::string variable_name, int &returned_variable_type, double &returned_double_val, std::string &returned_string_val)
	Get the value of an aprepro variable.
double	get_aprepro_numeric_value (std::string variable_name)
	get the value of the given aprepro variable
bool	get_node_constraint ()
	Query current setting for node constraint (move nodes to geometry)
int	get_node_constraint_value ()
	Query current setting for node constraint (move nodes to geometry)
double	get_node_constraint_smart_threshold ()
	Query current setting for node constraint smart threshold.
std::string	get_node_constraint_smart_metric ()
	Query current setting for node constraint smart metric Currently only for tets. Return either "distortion" of "normalized inradius".
std::string	get_vertex_type (int surface_id, int vertex_id)
	Get the Vertex Types for a specified vertex on a specified surface. Vertex types include "side", "end", "reverse", "unknown".
std::vector< int >	get_relatives (const std::string &source_geometry_type, int source_id, const std::string &target_geom_type)
	Get the relatives (parents/children) of a specified entity.
std::vector< int >	get_adjacent_surfaces (const std::string &geometry_type, int entity_id)
	Get a list of adjacent surfaces to a specified entity.
std::vector< int >	get_adjacent_volumes (const std::string &geometry_type, int entity_id)
	Get a list of adjacent volumes to a specified entity.
std::vector< int >	get_entities (const std::string &entity_type)
	Get all entities of a specified type (including geometry, mesh, etc...)
std::vector< int >	get_list_of_free_ref_entities (const std::string &geometry_type)
	Get all free entities of a given geometry type.
int	get_owning_body (const std::string &geometry_type, int entity_id)
	Get the owning body for a specified entity.
int	get_owning_volume (const std::string &geometry_type, int entity_id)
	Get the owning volume for a specified entity.
int	get_owning_volume_by_name (const std::string &entity_name)
	Get the owning volume for a specified entity.
double	get_curve_length (int curve_id)
	Get the length of a specified curve.
double	get_arc_length (int curve_id)
	Get the arc length of a specified curve.
double	get_distance_from_curve_start (double x_coordinate, double y_coordinate, double z_coordinate, int curve_id)
	Get the distance from a point on a curve to the curve's start point.
double	get_curve_radius (int curve_id)
	Get the radius of a specified arc.
std::array< double, 3 >	get_curve_center (int curve_id)
	Get the center point of the arc.
double	get_surface_area (int surface_id)
	Get the area of a surface.
std::vector< int >	get_similar_curves (std::vector< int > curve_ids, double tol=1e-3, bool use_percent_tol=true, bool on_similar_vols=true)
	Get similar curves with the same length.
std::vector< int >	get_similar_surfaces (std::vector< int > surface_ids, double tol=1e-3, bool use_percent_tol=true, bool on_similar_vols=true)
	Get similar surfaces with the same area and number of curves.
std::vector< int >	get_connected_surfaces (std::vector< int > surf_ids)
	Get a connected set of surfaces to the ones specified.
std::vector< int >	get_similar_volumes (std::vector< int > volume_ids, double tol=1e-3, bool use_percent_tol=true)
	Get similar volumes with the same volume and number of faces.
std::vector< double >	get_surface_principal_curvatures (int surface_id)
	Get the principal curvatures of a surface at surface mid_point.
double	get_volume_area (int volume_id)
	Get the area of a volume.
double	get_volume_volume (int vol_id)
	Get the volume of a volume.
int	get_num_volume_shells (int volume_id)
	Get the number of shells in this volume.
double	get_hydraulic_radius_surface_area (int surface_id)
	Get the area of a hydraulic surface.
double	get_hydraulic_radius_volume_area (int volume_id)
	Get the area of a hydraulic volume.
std::array< double, 3 >	get_center_point (const std::string &entity_type, int entity_id)
	Get the center point of a specified entity.
int	get_valence (int vertex_id)
	Get the valence for a specific vertex.
double	get_distance_between (int vertex_id_1, int vertex_id_2)
	Get the distance between two vertices.
double	get_distance_between_entities (std::string geom_type_1, int entity_id_1, std::string geom_type_2, int entity_id_2)
	Get the distance between two geom entities.
int	is_point_contained (const std::string &geometry_type, int entity_id, const std::array< double, 3 > &xyz_point)
	Determine if given point is inside, outside, on or unknown the given entity. note that this is typically used for volumes or sheet bodies.
void	print_surface_summary_stats ()
	Print the surface summary stats to the console.
void	print_volume_summary_stats ()
	Print the volume summary stats to the console.
int	get_block_count ()
	Get the current number of blocks.
int	get_sideset_count ()
	Get the current number of sidesets.
int	get_nodeset_count ()
	Get the current number of sidesets.
int	get_volume_count ()
	Get the current number of nodesets.
int	get_body_count ()
	Get the current number of bodies.
int	get_surface_count ()
	Get the current number of surfaces.
int	get_vertex_count ()
	Get the current number of vertices.
int	get_curve_count ()
	Get the current number of curves.
int	get_curve_count_in_volumes (std::vector< int > target_volume_ids)
	Get the current number of curves in the passed-in volumes.
std::vector< int >	get_current_ids (const std::string &entity_type)
	Get the current body ids.
bool	is_catia_engine_available ()
	Determine whether catia engine is available.
bool	is_acis_engine_available ()
bool	is_opencascade_engine_available ()
std::vector< int >	evaluate_exterior_angle (const std::vector< int > &curve_list, const double test_angle)
	find all curves in the given list with an exterior angle (the angle between surfaces) less than the test angle. This is equivalent to the df parser "exterior_angle" test. (draw curve with exterior_angle >90)
double	evaluate_exterior_angle_at_curve (int curve_id, int volume_id)
	return exterior angle at a single curve with respect to a volume
double	evaluate_surface_angle_at_vertex (int surf_id, int vert_id)
	return interior angle at a vertex on a specified surface
double	get_overlap_max_gap (void)
	Get the max gap setting for calculating surface overlaps.
void	set_overlap_max_gap (const double maximum_gap)
	Set the max gap setting for calculating surface overlaps.
double	get_overlap_min_gap (void)
	Get the min gap setting for calculating surface overlaps.
void	set_overlap_min_gap (const double min_gap)
	Set the min gap setting for calculating surface overlaps.
double	get_overlap_max_angle (void)
	Get the max angle setting for calculating surface overlaps.
void	set_overlap_max_angle (const double maximum_angle)
	Set the max angle setting for calculating surface overlaps.
Geometry Repair Support
void	get_small_surfaces_hydraulic_radius (std::vector< int > target_volume_ids, double mesh_size, std::vector< int > &returned_small_surfaces, std::vector< double > &returned_small_radius)
	Get the list of small hydraulic radius surfaces for a list of volumes.
std::vector< int >	get_small_surfaces_HR (std::vector< int > target_volume_ids, double mesh_size)
	Python callable version Get the list of small hydraulic radius surfaces for a list of volumes.
void	get_small_volumes_hydraulic_radius (std::vector< int > target_volume_ids, double mesh_size, std::vector< int > &returned_small_volumes, std::vector< double > &returned_small_radius)
	Get the list of small hydraulic radius volumes for a list of volumes.
std::vector< int >	get_small_curves (std::vector< int > target_volume_ids, double mesh_size)
	Get the list of small curves for a list of volumes.
std::vector< int >	get_smallest_curves (std::vector< int > target_volume_ids, int number_to_return)
	Get a list of the smallest curves in the list of volumes. The number returned is specified by 'num_to_return'.
std::vector< int >	get_small_surfaces (std::vector< int > target_volume_ids, double mesh_size)
	Get the list of small surfaces for a list of volumes.
bool	is_narrow_surface (int surface_id, double mesh_size)
	return whether the surface is narrow (has a width smaller than mesh_size)
std::vector< int >	get_narrow_surfaces (std::vector< int > target_volume_ids, double mesh_size)
	Get the list of narrow surfaces for a list of volumes.
std::vector< int >	get_small_and_narrow_surfaces (std::vector< int > target_ids, double small_area, double small_curve_size)
	Get the list of small or narrow surfaces from a list of volumes.
std::vector< int >	get_closed_narrow_surfaces (std::vector< int > target_ids, double narrow_size)
	Get the list of closed, narrow surfaces from a list of volumes.
std::vector< int >	get_surfs_with_narrow_regions (std::vector< int > target_ids, double narrow_size)
	Get the list of surfaces with narrow regions.
std::vector< int >	get_narrow_regions (std::vector< int > target_ids, double narrow_size)
	Get the list of surfaces with narrow regions.
std::vector< int >	get_small_volumes (std::vector< int > target_volume_ids, double mesh_size)
	Get the list of small volumes from a list of volumes.
bool	is_cylinder_surface (int surface_id)
	return whether the surface is a cylinder
bool	is_chamfer_surface (int surface_id, double thickness_threshold)
	return whether the surface is a chamfer
std::vector< std::vector< double > >	get_chamfer_surfaces (std::vector< int > target_volume_ids, double thickness_threshold)
	Get the list of chamfer surfaces for a list of volumes.
bool	is_blend_surface (int surface_id)
	return whether the surface is a blend
std::vector< int >	get_blend_surfaces (std::vector< int > target_volume_ids)
	Get the list of blend surfaces for a list of volumes.
std::vector< int >	get_small_radius_blend_surfaces (std::vector< int > target_volume_ids, double max_radius)
	Get the list of blend surfaces for a list of volumes that have a radius of curvature smaller than max_radius.
bool	is_close_loop_surface (int surface_id, double mesh_size)
	return whether the has one or more close loops
std::vector< int >	get_close_loops (std::vector< int > target_volume_ids, double mesh_size)
	Get the list of close loops (surfaces) for a list of volumes.
std::vector< std::vector< double > >	get_close_loops_with_thickness (std::vector< int > target_volume_ids, double mesh_size, int genus)
	Get the list of close loops (surfaces) for a list of volumes also return the corresponding minimum distances for each surface.
double	get_close_loop_thickness (int surface_id)
	Get the thickness of a close loop surface.
std::vector< std::vector< std::string > >	get_solutions_for_close_loop (int surface_id, double mesh_size)
	Get the solution list for a given close loop surface.
std::vector< int >	get_tangential_intersections (std::vector< int > target_volume_ids, double upper_bound, double lower_bound)
	Get the list of bad tangential intersections for a list of volumes.
std::vector< int >	get_coincident_vertices (std::vector< int > target_volume_ids, double high_tolerance)
std::vector< int >	get_close_vertex_curve_pairs (std::vector< int > target_volume_ids, double high_tolerance)
	Get the list of close vertex-curve pairs (python callable)
std::vector< std::vector< std::string > >	get_solutions_for_near_coincident_vertices (int vertex_id_1, int vertex_id_2)
	Get lists of display strings and command strings for near coincident vertices.
std::vector< std::vector< std::string > >	get_solutions_for_bad_geometry (std::string geom_type, int geom_id)
	Get lists of display strings and command strings for bad geometry.
std::vector< std::vector< std::string > >	get_solutions_for_overlapping_volumes (int volume_id_1, int volume_id_2, double maximum_gap_tolerance, double maximum_gap_angle)
	Get lists of display strings and command strings for overlapping volumes.
std::vector< std::vector< std::string > >	get_solutions_for_overlapping_surfaces (int surface_id_1, int surface_id_2)
	Get lists of display strings and command strings for overlapping surfaces.
std::vector< std::vector< std::string > >	get_volume_gap_solutions (int surface_id_1, int surface_id_2)
std::vector< std::vector< std::string > >	get_solutions_for_near_coincident_vertex_and_curve (int vertex_id, int curve_id)
	Get lists of display strings and command strings for near coincident vertices and curves.
std::vector< std::vector< std::string > >	get_solutions_for_near_coincident_vertex_and_surface (int vertex_id, int surface_id)
	Get lists of display strings and command strings for near coincident vertices and surfaces.
std::vector< std::vector< std::string > >	get_solutions_for_imprint_merge (int surface_id1, int surface_id2)
	Get lists of display strings and command strings for imprint/merge solutions.
std::vector< std::vector< std::string > >	get_solutions_for_forced_sweepability (int volume_id, std::vector< int > &source_surface_id_list, std::vector< int > &target_surface_id_list, double small_curve_size=-1.0)
	This function only works from C++ Get lists of display strings and command strings for forced sweepability solutions
std::vector< std::vector< std::string > >	get_solutions_for_volumes (int vol_id, double small_curve_size, double mesh_size)
	Get lists of display, preview and command strings for small volume solutions.
std::vector< std::vector< std::string > >	get_solutions_for_classified_volume (std::string classification, int vol_id)
	Get lists of display, preview and command strings for a classified volume.
std::vector< std::vector< std::string > >	get_solutions_for_bolt (int bolt_id, int insert_id, int threaded_vol_id)
	get the solutions for a volume classified as a bole. faster than get_solutions_for_classified_volume if the lower volume and insert volumes are alraedy known
std::vector< std::vector< std::string > >	get_solutions_for_bolt_hole (int bearing_hole, std::vector< int > threaded_holes)
	get the solutions for a set of concentric holes used as a fastener pilot hole
std::vector< std::vector< std::string > >	get_solutions_for_classified_surface (std::string classification, int surf_id)
	Get lists of display, preview and command strings for a classified surface.
std::vector< std::vector< std::string > >	get_solutions_for_thin_volume (int vol_id, std::vector< int > near_vols, bool include_weights=false, bool include_type=false)
	Get lists of display, preview and command strings for a volume to reduce to shell.
std::vector< std::vector< std::string > >	get_solutions_for_sheet_volumes (std::vector< int > vol_ids, std::vector< double > thickness)
	Get lists of display, preview and command strings to connect sheet bodies.
std::vector< std::vector< std::string > >	get_solutions_for_sheet_volume_connection (std::vector< int > vol1_sheets, std::vector< int > vol2_sheets, double thickness1, double thickness2, std::string close_type="", int close_id=0)
	Get lists of display, preview and command strings for two neighboring sheet volume sets. each set should be part of a common parent 3D volume.
std::vector< std::vector< std::string > >	get_solutions_for_small_surfaces (int surface_id, double small_curve_size, double mesh_size)
	Get lists of display, preview and command strings for small surface solutions.
std::vector< std::vector< std::string > >	get_solutions_for_small_curves (int curve_id, double small_curve_size, double mesh_size)
	Get lists of display, preview and command strings for small curve solutions.
std::vector< std::vector< std::string > >	get_solutions_for_sharp_angle_vertex (int vertex_id, double small_curve_size, double mesh_size)
	Get lists of display, preview and command strings for sharp angle solutions.
std::vector< std::vector< std::string > >	get_solutions_for_surfaces_with_narrow_regions (int surface_id, double small_curve_size, double mesh_size)
	Get lists of display, preview and command strings for surfaces with narrow regions solutions.
std::vector< std::vector< std::string > >	get_solutions_for_cone_surface (int surface_id)
	Get lists of display, preview and command strings for surfaces with defined as cones.
bool	get_solutions_for_source_target (int volume_id, std::vector< std::vector< int > > &feasible_source_surface_id_list, std::vector< std::vector< int > > &feasible_target_surface_id_list, std::vector< std::vector< int > > &infeasible_source_surface_id_list, std::vector< std::vector< int > > &infeasible_target_surface_id_list)
	Get a list of suggested sources and target surface ids given a specified volume.
void	get_sharp_surface_angles (std::vector< int > target_volume_ids, std::vector< int > &returned_large_surface_angles, std::vector< int > &returned_small_surface_angles, std::vector< double > &returned_large_angles, std::vector< double > &returned_small_angles, double upper_bound, double lower_bound)
	Get the list of sharp surface angles for a list of volumes.
void	get_sharp_curve_angles (std::vector< int > target_volume_ids, std::vector< int > &returned_large_curve_angles, std::vector< int > &returned_small_curve_angles, std::vector< double > &returned_large_angles, std::vector< double > &returned_small_angles, double upper_bound, double lower_bound)
	Get the list of sharp curve angles for a list of volumes.
std::vector< std::vector< double > >	get_sharp_angle_vertices (std::vector< int > target_volume_ids, double upper_bound, double lower_bound)
	Get the list of vertices at sharp curve angles for a list of volumes returns two parallel arrays. First array are the vertex ids and second are the associated angles at the vertices.
bool	is_cone_surface (int surface_id)
	return whether the surface is a cone
std::vector< int >	get_cone_surfaces (std::vector< int > target_volume_ids)
	return a list of surfaces that are cones defined by a conic surface and a hard point
void	get_bad_geometry (std::vector< int > target_volume_ids, std::vector< int > &returned_body_list, std::vector< int > &returned_volume_list, std::vector< int > &returned_surface_list, std::vector< int > &returned_curve_list)
	This function only works from C++ Get the list of bad geometry for a list of volumes
std::vector< std::vector< int > >	get_overlapping_surfaces_in_bodies (std::vector< int > body_ids, bool filter_slivers=false)
	returns a vector of vectors defining surface overlaps The first surface (id) in each vector overlaps with all subsequent surfaces in the vector.
void	get_overlapping_surfaces_in_volumes (std::vector< int > target_volume_ids, std::vector< int > &returned_surface_list_1, std::vector< int > &returned_surface_list_2, std::vector< double > &returned_distance_list, std::vector< double > &returned_overlap_area_list, bool filter_slivers=false, bool filter_volume_overlaps=false, int cache_overlaps=0)
	This function only works from C++ Get the list of overlapping surfaces for a list of volumes
void	get_overlapping_surfaces (std::vector< int > target_surface_ids, std::vector< int > &returned_surface_list_1, std::vector< int > &returned_surface_list_2, std::vector< double > &returned_distance_list, std::vector< double > &returned_overlap_area_list, bool filter_slivers=false, bool filter_volume_overlaps=false, int cache_overlaps=0)
	This function only works from C++ Get the list of overlapping surfaces for a list of surfaces
void	get_overlapping_curves (std::vector< int > target_surface_ids, double min_gap, double max_gap, std::vector< int > &returned_curve_list_1, std::vector< int > &returned_curve_list_2, std::vector< double > &returned_distance_list)
void	get_volume_gaps (std::vector< int > target_volume_ids, std::vector< int > &returned_surface_list_1, std::vector< int > &returned_surface_list_2, std::vector< double > &returned_distance_list, std::vector< double > &returned_overlap_area_list, double maximum_gap_tolerance, double maximum_gap_angle, int cache_overlaps=0)
	This function only works from C++ Get the list of gaps for a list of volumes
std::vector< VolumeGap >	get_gaps_between_volumes (std::vector< int > target_volume_ids, double maximum_gap_tolerance, double maximum_gap_angle, int cache_overlaps=0)
std::vector< int >	get_overlapping_volumes (std::vector< int > target_volume_ids)
	Get the list of overlapping volumes for a list of volumes.
std::vector< int >	get_overlapping_volumes_at_volume (int volume_id, std::vector< int > compare_volumes)
	Get the list of overlapping volumes from the model for a single volume.
std::vector< int >	get_overlapping_surfaces_at_surface (int surface_id, std::vector< int > compare_volumes, int cache_overlaps=0)
	Get the list of overlapping surfaces from the model for a single surface.
std::vector< int >	get_nearby_volumes_at_volume (int volume_id, std::vector< int > compare_volumes, double distance)
	Get the list of nearby volumes from the model for a single volume.
std::vector< int >	get_unmerged_curves_on_shells (std::vector< int > shell_vols, std::vector< double > thickness)
	return a list of curve IDs on the given shell volumes that are in proximity to one of the other shell volumes in the list
void	get_mergeable_entities (std::vector< int > target_volume_ids, std::vector< std::vector< int > > &returned_surface_list, std::vector< std::vector< int > > &returned_curve_list, std::vector< std::vector< int > > &returned_vertex_list, double merge_tol=-1)
	This function only works from C++ Get the list of mergeable entities from a list of volumes
std::vector< std::vector< int > >	get_mergeable_vertices (std::vector< int > target_volume_ids)
	Get the list of mergeable vertices from a list of volumes/bodies.
std::vector< std::vector< int > >	get_mergeable_curves (std::vector< int > target_volume_ids)
	Get the list of mergeable curves from a list of volumes/bodies.
std::vector< std::vector< int > >	get_mergeable_surfaces (std::vector< int > target_volume_ids)
	Get the list of mergeable surfaces from a list of volumes/bodies.
void	get_closest_vertex_curve_pairs (std::vector< int > target_ids, int &returned_number_to_return, std::vector< int > &returned_vertex_ids, std::vector< int > &returned_curve_ids, std::vector< double > &returned_distances)
	Find the n closest vertex pairs in the model.
void	get_smallest_features (std::vector< int > target_ids, int &returned_number_to_return, std::vector< int > &returned_type_1_list, std::vector< int > &returned_type_2_list, std::vector< int > &returned_id_1_list, std::vector< int > &returned_id_2_list, std::vector< double > &returned_distance_list)
	Finds all of the smallest features.
double	estimate_merge_tolerance (std::vector< int > target_volume_ids, bool accurate_in=false, bool report_in=false, double low_value_in=-1.0, double high_value_in=-1.0, int number_calculations_in=10, bool return_calculations_in=false, std::vector< double > *merge_tolerance_list=NULL, std::vector< int > *number_of_proximities_list=NULL)
	Estimate a good merge tolerance for the passed-in volumes.
void	find_floating_volumes (std::vector< int > target_volume_ids, std::vector< int > &returned_floating_id_list)
	Get the list of volumes with no merged children.
void	find_nonmanifold_curves (std::vector< int > target_volume_ids, std::vector< int > &returned_curve_list)
	Get the list of nonmanifold curves in the volume list.
void	find_nonmanifold_vertices (std::vector< int > target_volume_ids, std::vector< int > &returned_vertex_list)
	Get the list of nonmanifold vertices in the volume list.
void	get_coincident_entity_pairs (std::vector< int > target_volume_ids, std::vector< int > &returned_v_v_vertex_list, std::vector< int > &returned_v_c_vertex_list, std::vector< int > &returned_v_c_curve_list, std::vector< int > &returned_v_s_vertex_list, std::vector< int > &returned_v_s_surf_list, std::vector< double > &returned_vertex_distance_list, std::vector< double > &returned_curve_distance_list, std::vector< double > &returned_surf_distance_list, double low_value, double high_value, bool do_vertex_vertex=true, bool do_vertex_curve=true, bool do_vertex_surf=true, bool filter_same_volume_cases=false)
	Get the list of coincident vertex-vertex, vertex-curve, and vertex-surface pairs and distances from a list of volumes.
void	get_coincident_vertex_vertex_pairs (std::vector< int > target_volume_ids, std::vector< int > &returned_vertex_pair_list, std::vector< double > &returned_distance_list, double low_value, double threshold_value, bool filter_same_volume_cases=false)
	Get the list of coincident vertex pairs and distances from a list of volumes.
void	get_coincident_vertex_curve_pairs (std::vector< int > target_volume_ids, std::vector< int > &returned_vertex_list, std::vector< int > &returned_curve_list, std::vector< double > &returned_distance_list, double low_value, double threshold_value, bool filter_same_volume_cases=false)
	Get the list of coincident vertex/curve pairs and distances from a list of volumes.
void	get_coincident_vertex_surface_pairs (std::vector< int > target_volume_ids, std::vector< int > &returned_vertex_list, std::vector< int > &returned_surface_list, std::vector< double > &returned_distance_list, double low_value, double threshold_value, bool filter_same_volume_cases=false)
	Get the list of coincident vertex/surface pairs and distances from a list of volumes.
std::vector< std::vector< std::string > >	get_solutions_for_decomposition (const std::vector< int > &volume_list, double exterior_angle, bool do_imprint_merge, bool tolerant_imprint)
	Get the list of possible decompositions.
std::vector< std::vector< std::string > >	get_solutions_for_blends (int surface_id)
	Get the solution list for a given blend surface.
std::vector< std::vector< int > >	get_blend_chains (int surface_id)
	Returns the blend chains for a surface.
std::vector< std::vector< int > >	get_chamfer_chains (int surface_id)
	Returns the chamfer chains for a surface.
bool	are_adjacent_surfaces (std::vector< int > surface_ids)
	return whether two or more surfaces share at least one manifold curve (common curve is part of exactly two surfaces)
bool	are_adjacent_curves (std::vector< int > curve_ids)
	return whether two or more curves share at least one manifold vertex (common vertex is part of exactly two curves)
bool	is_continuous_surface (int surface_id, double angle_tol)
	return whether the surface has any adjacent surfaces that are continuous (exterior angle is 180 degrees +- angle_tol)
std::vector< int >	get_continuous_surfaces (int surface_id, double angle_tol)
	Returns the adjacent surfaces that are continuous (exterior angle is 180 degrees +- angle_tol)
std::vector< int >	get_continuous_curves (int curve_id, double angle_tol)
	Returns the adjacent curves that are continuous (angle is 180 degrees +- angle_tol)
bool	is_cavity_surface (int surface_id)
	return whether the surface is part of a cavity
bool	is_hole_surface (int surface_id, double radius_threshold)
	return whether the surface is part of a hole
std::vector< int >	get_cavity_surfaces (int surface_id)
	Returns the adjacent surfaces in a cavity for a surface.
std::vector< int >	get_hole_surfaces (int surface_id)
	Returns the adjacent surfaces in a hole for a surface.
std::vector< std::vector< int > >	get_surface_cavity_collections (const std::vector< int > &volume_list, double hr_threshold, double area_threshold, std::vector< double > &return_cavity_hrs, std::vector< double > &return_cavity_areas)
	Returns the collections of surfaces that comprise holes or cavities in the specified volumes. Filter by hydarulic radius and area of the cavity.
std::vector< std::pair< std::vector< int >, double > >	get_surface_hole_collections (const std::vector< int > &volume_list, double radius_threshold)
	Returns the collections of surfaces that comprise holes in the specified volumes. Filter by radius of the hole.
std::vector< std::pair< std::vector< int >, double > >	get_blend_chain_collections (const std::vector< int > &volume_list, double radius_threshold)
	Returns the collections of surfaces that comprise blend chains in the specified volumes. Filter by radius threshold.
std::vector< std::pair< std::vector< int >, double > >	get_chamfer_chain_collections (const std::vector< int > &volume_list, double thickness_threshold)
	Returns the collections of surfaces that comprise chamfers in the specified volumes. Filter by thickness of chamfer.
std::vector< std::vector< std::string > >	get_solutions_for_cavity_surface (int surface_id)
	Get the solution list for a given cavity surface.
double	get_merge_tolerance ()
	Get the current merge tolerance value.
Blocks, Sidesets, and Nodesets
std::string	get_exodus_entity_name (const std::string entity_type, int entity_id)
	Get the name associated with an exodus entity.
std::string	get_exodus_entity_type (std::string entity_type, int entity_id)
	Get the type of an exodus entity.
std::string	get_exodus_entity_description (std::string entity_type, int entity_id)
	Get the description associated with an exodus entity.
std::vector< double >	get_all_exodus_times (const std::string &filename)
	Open an exodus file and get a vector of all stored time stamps.
std::vector< std::string >	get_all_exodus_variable_names (const std::string &filename, const std::string &variable_type)
	Open an exodus file and get a list of all stored variable names.
int	get_block_id (std::string entity_type, int entity_id)
	Get the associated block id for a specific curve, surface, or volume.
std::vector< int >	get_block_ids (const std::string &mesh_geometry_file_name)
	Get list of block ids from a mesh geometry file.
std::vector< int >	get_block_id_list ()
	Get a list of all blocks.
std::vector< int >	get_nodeset_id_list ()
	Get a list of all nodesets.
std::vector< int >	get_sideset_id_list ()
	Get a list of all sidesets.
std::vector< int >	get_bc_id_list (CI_BCTypes bc_type_enum)
	Get a list of all bcs of a specified type.
std::string	get_bc_name (CI_BCTypes bc_type_enum, int bc_id)
	Get the name for the specified bc.
std::vector< int >	get_nodeset_id_list_for_bc (CI_BCTypes bc_type_enum, int bc_id)
	Get a list of all nodesets the specified bc is applied to.
std::vector< int >	get_sideset_id_list_for_bc (CI_BCTypes bc_type_enum, int bc_id)
	Get a list of all sidesets the specified bc is applied to.
int	get_next_sideset_id ()
	Get a next available sideset id.
int	get_next_nodeset_id ()
	Get a next available nodeset id.
int	get_next_block_id ()
	Get a next available block id.
std::string	get_copy_nodeset_on_geometry_copy_setting ()
	Get the copy nodeset on geometry copy setting.
std::string	get_copy_sideset_on_geometry_copy_setting ()
	Get the copy nodeset on geometry copy setting.
std::string	get_copy_block_on_geometry_copy_setting ()
	Get the copy nodeset on geometry copy setting.
bool	set_copy_nodeset_on_geometry_copy_setting (std::string val)
	Set the copy nodeset on geometry copy setting "ON", "USE_ORIGINAL", or "OFF".
bool	set_copy_sideset_on_geometry_copy_setting (std::string val)
	Set the copy sideset on geometry copy setting "ON", "USE_ORIGINAL", or "OFF".
bool	set_copy_block_on_geometry_copy_setting (std::string val)
	Set the copy block on geometry copy setting "ON", "USE_ORIGINAL", or "OFF".
void	get_block_children (int block_id, std::vector< int > &returned_group_list, std::vector< int > &returned_node_list, std::vector< int > &returned_sphere_list, std::vector< int > &returned_edge_list, std::vector< int > &returned_tri_list, std::vector< int > &returned_face_list, std::vector< int > &returned_pyramid_list, std::vector< int > &returned_tet_list, std::vector< int > &returned_hex_list, std::vector< int > &returned_wedge_list, std::vector< int > &returned_volume_list, std::vector< int > &returned_surface_list, std::vector< int > &returned_curve_list, std::vector< int > &returned_vertex_list)
	Get lists of any and all possible children of a block.
void	get_nodeset_children (int nodeset_id, std::vector< int > &returned_node_list, std::vector< int > &returned_volume_list, std::vector< int > &returned_surface_list, std::vector< int > &returned_curve_list, std::vector< int > &returned_vertex_list)
	get lists of any and all possible children of a nodeset
void	get_sideset_children (int sideset_id, std::vector< int > &returned_face_list, std::vector< int > &returned_surface_list, std::vector< int > &returned_curve_list)
	get lists of any and all possible children of a sideset
std::vector< int >	get_block_volumes (int block_id)
	Get a list of volume ids associated with a specific block.
std::vector< int >	get_block_surfaces (int block_id)
	Get a list of surface associated with a specific block.
std::vector< int >	get_block_curves (int block_id)
	Get a list of curve associated with a specific block.
std::vector< int >	get_block_vertices (int block_id)
	Get a list of vertices associated with a specific block.
bool	get_block_elements_and_nodes (int block_id, std::vector< int > &returned_node_list, std::vector< int > &returned_sphere_list, std::vector< int > &returned_edge_list, std::vector< int > &returned_tri_list, std::vector< int > &returned_face_list, std::vector< int > &returned_pyramid_list, std::vector< int > &returned_wedge_list, std::vector< int > &returned_tet_list, std::vector< int > &returned_hex_list)
	Get lists of the nodes and different element types associated with this block. This function is recursive, meaning that if the block was created pointing to a piece of geometry, it will traverse down and get the mesh entities associated to that geometry.
std::vector< int >	get_edges_to_swap (int curve_id)
	Given a curve defining a knife edge between two triangle-meshed surfaces, return a list of edges on triangles at the curve that are good candidates for swapping. A good candidate for swapping means that if swapped, the two triangles at the knife's edge will have a larger interior dihedral angle between them, allowing a larger volume to accommodate tetmeshing.
std::vector< int >	get_block_nodes (int block_id)
	Get a list of nodes associated with a specific block.
std::vector< int >	get_block_edges (int block_id)
	Get a list of edges associated with a specific block.
std::vector< int >	get_block_tris (int block_id)
	Get a list of tris associated with a specific block.
std::vector< int >	get_block_faces (int block_id)
	Get a list of faces associated with a specific block.
std::vector< int >	get_block_pyramids (int block_id)
	Get a list of pyramids associated with a specific block.
std::vector< int >	get_block_wedges (int block_id)
	Get a list of wedges associated with a specific block.
std::vector< int >	get_block_tets (int block_id)
	Get a list of tets associated with a specific block.
std::vector< int >	get_block_hexes (int block_id)
	Get a list of hexes associated with a specific block.
std::vector< int >	get_volume_hexes (int volume_id)
	get the list of any hex elements in a given volume
std::vector< int >	get_volume_tets (int volume_id)
	get the list of any tet elements in a given volume
std::vector< int >	get_volume_wedges (int volume_id)
	get the list of any wedge elements in a given volume
std::vector< int >	get_volume_pyramids (int volume_id)
	get the list of any pyramid elements in a given volume
std::vector< int >	get_nodeset_volumes (int nodeset_id)
	Get a list of volume ids associated with a specific nodeset.
std::vector< int >	get_nodeset_surfaces (int nodeset_id)
	Get a list of surface ids associated with a specific nodeset.
std::vector< int >	get_nodeset_curves (int nodeset_id)
	Get a list of curve ids associated with a specific nodeset.
std::vector< int >	get_nodeset_vertices (int nodeset_id)
	Get a list of vertex ids associated with a specific nodeset.
std::vector< int >	get_nodeset_nodes (int nodeset_id)
	Get a list of node ids associated with a specific nodeset. This only returns the nodes that were specifically assigned to this nodeset. If the nodeset was created as a piece of geometry, get_nodeset_nodes will not return the nodes on that geometry See also get_nodeset_nodes_inclusive.
std::vector< int >	get_nodeset_nodes_inclusive (int nodeset_id)
	Get a list of node ids associated with a specific nodeset. This includes all nodes specifically assigned to the nodeset, as well as nodes associated to a piece of geometry which was used to define the nodeset.
std::vector< int >	get_sideset_curves (int sideset_id)
	Get a list of curve ids associated with a specific sideset.
std::vector< int >	get_sideset_edges (int sideset_id)
	Get a list of any quads in a sideset.
std::vector< int >	get_curve_edges (int curve_id)
	get the list of any edge elements on a given curve
std::vector< int >	get_sideset_surfaces (int sideset_id)
	Get a list of any surfaces in a sideset.
std::vector< int >	get_sideset_quads (int sideset_id)
	Get a list of any quads in a sideset.
std::vector< int >	get_sideset_tris (int sideset_id)
	Get a list of any tris in a sideset.
double	get_sideset_area (int sideset_id)
	Get area of the sideset.
std::vector< int >	get_surface_quads (int surface_id)
	get the list of any quad elements on a given surface
std::vector< int >	get_surface_tris (int surface_id)
	get the list of any tri elements on a given surface
int	get_surface_num_loops (int surface_id)
	get the number of loops on the surface
std::vector< std::vector< int > >	get_surface_loop_nodes (int surface_id)
	get the ordered list of nodes on the loops of this surface
std::string	get_entity_sense (std::string source_type, int source_id, int sideset_id)
	Get the sense of a sideset item.
std::string	get_wrt_entity (std::string source_type, int source_id, int sideset_id)
	Get the with-respect-to entity.
std::vector< std::string >	get_geometric_owner (std::string mesh_entity_type, std::string mesh_entity_list)
	Get a list of geometric owners given a list of mesh entities.
std::vector< std::string >	get_all_geometric_owners (std::string mesh_entity_type, std::string mesh_entity_list)
	Get a list of geometric owners given a list of mesh entities. returns geometric owners of entity as well as all of its child mesh entities.
Geometry-Mesh Entity Support
std::vector< int >	get_volume_nodes (int volume_id)
	Get list of node ids owned by a volume. Excludes nodes owned by bounding surfs, curves and verts.
std::vector< int >	get_surface_nodes (int surface_id)
	Get list of node ids owned by a surface. Excludes nodes owned by bounding curves and verts.
std::vector< int >	get_curve_nodes (int curve_id)
	Get list of node ids owned by a curve. Excludes nodes owned by bounding vertices.
int	get_vertex_node (int vertex_id)
	Get the node owned by a vertex.
Group Support
int	get_id_from_name (const std::string &name)
	Get id for a named entity.
std::vector< int >	get_all_ids_from_name (const std::string &geo_type, const std::string &name)
	Get all ids of a geometry type with the prefix given by string.
void	get_group_children (int group_id, std::vector< int > &returned_group_list, std::vector< int > &returned_body_list, std::vector< int > &returned_volume_list, std::vector< int > &returned_surface_list, std::vector< int > &returned_curve_list, std::vector< int > &returned_vertex_list, int &returned_node_count, int &returned_edge_count, int &returned_hex_count, int &returned_quad_count, int &returned_tet_count, int &returned_tri_count, int &returned_wedge_count, int &returned_pyramid_count, int &returned_sphere_count)
	Get group children.
std::vector< int >	get_group_groups (int group_id)
	Get group groups (groups that are children of another group)
std::vector< int >	get_group_volumes (int group_id)
	Get group volumes (volumes that are children of a group)
std::vector< int >	get_group_bodies (int group_id)
	Get group bodies (bodies that are children of a group)
std::vector< int >	get_group_surfaces (int group_id)
	Get group surfaces (surfaces that are children of a group)
std::vector< int >	get_group_curves (int group_id)
	Get group curves (curves that are children of a group)
std::vector< int >	get_group_vertices (int group_id)
	Get group vertices (vertices that are children of a group)
std::vector< int >	get_group_nodes (int group_id)
	Get group nodes (nodes that are children of a group)
std::vector< int >	get_group_edges (int group_id)
	Get group edges (edges that are children of a group)
std::vector< int >	get_group_quads (int group_id)
	Get group quads (quads that are children of a group)
std::vector< int >	get_group_tris (int group_id)
	Get group tris (tris that are children of a group)
std::vector< int >	get_group_tets (int group_id)
	Get group tets (tets that are children of a group)
std::vector< int >	get_group_wedges (int group_id)
	Get group wedges (wedges that are children of a group)
std::vector< int >	get_group_pyramids (int group_id)
	Get group pyramids (pyramids that are children of a group)
std::vector< int >	get_group_spheres (int group_id)
std::vector< int >	get_group_hexes (int group_id)
int	get_next_group_id ()
	Get the next available group id from Cubit.
void	delete_all_groups ()
	Delete all groups.
void	delete_group (int group_id)
	Delete a specific group.
void	set_max_group_id (int maximum_group_id)
	Reset Cubit's max group id This is really dangerous to use and exists only to overcome a limitation with Cubit. Cubit keeps track of the next group id to assign. But those ids just keep incrementing in Cubit. Some of the power tools in the Cubit GUI make groups 'under the covers' for various operations. The groups are immediately deleted. But, creating those groups will cause Cubit's group id to increase and downstream journal files may be messed up because those journal files are expecting a certain ID to be available.
int	create_new_group ()
	Create a new group.
void	remove_entity_from_group (int group_id, int entity_id, const std::string &entity_type)
	Remove a specific entity from a specific group.
void	add_entity_to_group (int group_id, int entity_id, const std::string &entity_type)
	Add a specific entity to a specific group.
void	add_entities_to_group (int group_id, const std::vector< int > &entity_id, const std::string &entity_type)
	Add a list of entities to a specific group.
void	group_list (std::vector< std::string > &name_list, std::vector< int > &returned_id_list)
	Get the names and ids of all the groups (excluding the pick group) that are defined by the current cubit session.
std::vector< std::pair< std::string, int > >	group_names_ids ()
	Get the names and ids of all the groups returned in a name/id structure that are defined by the current cubit session.
std::vector< int >	get_mesh_group_parent_ids (const std::string &element_type, int element_id)
	Get the group ids which are parents to the indicated mesh element.
bool	is_mesh_element_in_group (const std::string &element_type, int element_id)
	Indicates whether a mesh element is in a group.
General Purpose Utility
bool	is_part_of_list (int target_id, std::vector< int > id_list)
	Routine to check for the presence of an id in a list of ids.
int	get_last_id (const std::string &entity_type)
	Get the id of the last created entity of the given type.
bool	entity_exists (const std::string &entity_type, int id)
	return whether an entity of specified ID exists
std::string	get_idless_signature (std::string entity_type, int entity_id)
	get the idless signature of a geometric or mesh entity
std::string	get_idless_signatures (std::string entity_type, const std::vector< int > &entity_id_list)
	get the idless signatures of a range of geometric or mesh entities
Metadata Support
std::string	get_assembly_classification_level ()
	Get Classification Level for metadata.
std::string	get_assembly_classification_category ()
	Get Classification Category for metadata.
std::string	get_assembly_weapons_category ()
	Get Weapons Category for metadata.
std::string	get_assembly_metadata (int volume_id, int data_type)
	Get metadata for a specified volume id.
bool	is_assembly_metadata_attached (int volume_id)
	Determine whether metadata is attached to a specified volume.
std::string	get_assembly_name (int assembly_id)
	Get the stored name of an assembly node.
std::string	get_assembly_path (int assembly_id)
	Get the stored path of an assembly node.
std::string	get_assembly_type (int assembly_id)
	Get the stored type of an assembly node.
std::string	get_parent_assembly_path (int assembly_id)
	Get the stored path of an assembly node' parent.
int	get_assembly_level (int assembly_id)
	Get the stored level of an assembly node.
std::string	get_assembly_description (int assembly_id)
	Get the stored description of an assembly node.
int	get_assembly_instance (int assembly_id)
	Get the stored instance number of an assembly node.
int	get_parent_assembly_instance (int assembly_id)
	Get the stored instance number of an assembly node's instance.
std::string	get_assembly_file_format (int assembly_id)
	Get the stored file format of an assembly node.
std::string	get_assembly_units (int assembly_id)
	Get the stored units measure of an assembly node.
std::string	get_assembly_material_description (int assembly_id)
	Get the stored material description of an assembly part.
std::string	get_assembly_material_specification (int assembly_id)
	Get the stored material specification of an assembly part.
Mesh Element Queries
int	get_exodus_id (const std::string &entity_type, int entity_id)
	Get the exodus/genesis id for this element.
std::string	get_geometry_owner (const std::string &entity_type, int entity_id)
	Get the geometric owner of this mesh element.
std::vector< int >	get_connectivity (const std::string &entity_type, int entity_id)
	Get the list of node ids contained within a mesh entity.
std::vector< int >	get_expanded_connectivity (const std::string &entity_type, int entity_id)
	Get the list of node ids contained within a mesh entity, including interior nodes.
std::vector< int >	get_sub_elements (const std::string &entity_type, int entity_id, int dimension)
	Get the lower dimesion entities associated with a higher dimension entities. For example get the faces associated with a hex or the edges associated with a tri.
bool	get_node_exists (int node_id)
	Check the existance of a node.
bool	get_element_exists (int element_id)
	Check the existance of an element.
std::string	get_element_type (int element_id)
	return the type of a given element
int	get_element_type_id (int element_id)
	return the type id of a given element
int	get_element_block (int element_id)
	return the block that a given element is in.
int	get_global_element_id (const std::string &element_type, int id)
	Given a hex, tet, etc. id, return the global element id.
int	get_hex_global_element_id (int hex_id)
	Given a hex id, return the global element id.
int	get_tet_global_element_id (int tet_id)
	Given a tet id, return the global element id.
int	get_wedge_global_element_id (int wedge_id)
	Given a wedge id, return the global element id.
int	get_pyramid_global_element_id (int pyramid_id)
	Given a pyramid id, return the global element id.
int	get_tri_global_element_id (int tri_id)
	Given a tri id, return the global element id.
int	get_quad_global_element_id (int quad_id)
	Given a quad id, return the global element id.
int	get_edge_global_element_id (int edge_id)
	Given a edge id, return the global element id.
int	get_sphere_global_element_id (int edge_id)
	Given a sphere id, return the global element id.
int	get_node_global_id (int node_id)
	Given a node id, return the global element id that is assigned when the mesh is exported.
int	get_closest_node (double x_coordinate, double y_coordinate, double z_coordinate)
	Get the node closest to the given coordinates.
std::array< double, 3 >	get_nodal_coordinates (int node_id)
	Get the nodal coordinates for a given node id.
std::vector< int >	get_node_faces (int node_id)
std::vector< int >	get_node_tris (int node_id)
std::vector< int >	get_node_edges (int node_id)
	Get the edge ids that share a node.
bool	get_node_position_fixed (int node_id)
	Query "fixedness" state of node. A fixed node is not affecting by smoothing.
std::vector< std::pair< int, int > >	get_submap_corner_types (int surface_id)
	Get a list of vertex ids and the corresponding corner vertex types if the surface were defined as submap surface. There are no side affects. This does not actually assign corner types or change the underlying mesh scheme of the surface.
std::string	get_sideset_element_type (int sideset_id)
	Get the element type of a sideset.
std::string	get_block_element_type (int block_id)
	Get the element type of a block.
int	get_exodus_element_count (int entity_id, std::string entity_type)
	Get the number of elements in a exodus entity.
int	get_block_attribute_count (int block_id)
	Get the number of attributes in a block.
int	get_block_element_attribute_count (int block_id)
	Get the number of attributes in a block element.
double	get_block_attribute_value (int block_id, int attribute_index)
	Get a specific block attribute value.
std::string	get_block_attribute_name (int block_id, int attribute_index)
	Get a specific block attribute name.
std::vector< std::string >	get_block_element_attribute_names (int block_id)
	Get a specific block element attribute name.
std::vector< std::string >	get_valid_block_element_types (int block_id)
	Get a list of potential element types for a block.
int	get_block_material (int block_id)
	Get the id of the material assigned to the specified block.
std::vector< std::vector< int > >	get_blocks_with_materials ()
	Get the block ids and ids of the respective materials assigned to each block.
int	get_exodus_variable_count (std::string container_type, int container_id)
	Get the number of exodus variables in a nodeset, sideset, or block.
std::vector< std::string >	get_exodus_variable_names (std::string container_type, int container_id)
	Get the names of exodus variables in a nodeset, sideset, or block.
int	get_nodeset_node_count (int nodeset_id)
	Get the number of nodes in a nodeset.
int	get_geometry_node_count (const std::string &entity_type, int entity_id)
	Get the node count for a specific geometric entity.
void	get_owning_volume_ids (const std::string &entity_type, std::vector< int > &entity_list, std::vector< int > &volume_ids)
	Gets the id's of the volumes that are owners of one of the specified entities.
std::string	get_mesh_element_type (const std::string &entity_type, int entity_id)
	Get the mesh element type contained in the specified geometry.
Boundary Condition Support
bool	is_on_thin_shell (CI_BCTypes bc_type_enum, int entity_id)
	Determine whether a BC is on a thin shell. Valid for temperature, convection and heatflux.
bool	temperature_is_on_solid (CI_BCTypes bc_type_enum, int entity_id)
	Determine whether a BC temperature is on a solid. Valid for convection and temperature.
bool	convection_is_on_solid (int entity_id)
	Determine whether a BC convection is on a solid. Valid for convection.
bool	convection_is_on_shell_area (int entity_id, CI_BCEntityTypes shell_area_enum)
	Determine whether a BC convection is on a shell top or bottom. Valid for convection.
double	get_convection_coefficient (int entity_id, CI_BCEntityTypes bc_type_enum)
	Get the convection coefficient.
double	get_bc_temperature (CI_BCTypes bc_type_enum, int entity_id, CI_BCEntityTypes temp_type_enum)
	Get the temperature. Valid for convection, temperature.
bool	temperature_is_on_shell_area (CI_BCTypes bc_type_enum, CI_BCEntityTypes bc_area_enum, int entity_id)
	Determine whether a BC temperature is on a shell area. Valid for convection and temperature and on top, bottom, gradient, and middle.
bool	heatflux_is_on_shell_area (CI_BCEntityTypes bc_area_enum, int entity_id)
	Determine whether a BC heatflux is on a shell area.
double	get_heatflux_on_area (CI_BCEntityTypes bc_area_enum, int entity_id)
	Get the heatflux on a specified area.
int	get_cfd_type (int entity_id)
	Get the cfd subtype for a specified cfd BC.
double	get_contact_pair_friction_value (int entity_id)
	Get the contact pair's friction value.
double	get_contact_pair_tolerance_value (int entity_id)
	Get the contact pair's upper bound tolerance value.
double	get_contact_pair_tol_lower_value (int entity_id)
	Get the contact pair's lower bound tolerance value.
bool	get_contact_pair_tied_state (int entity_id)
	Get the contact pair's tied state.
bool	get_contact_pair_general_state (int entity_id)
	Get the contact pair's general state.
bool	get_contact_pair_exterior_state (int entity_id)
	Get the contact pair's exterior state.
const double *	get_displacement_dof_values (int entity_id)
	This function only available from C++ Get the displacement's dof values
const int *	get_displacement_dof_signs (int entity_id)
	This function only available from C++ Get the displacement's dof signs
const double *	get_velocity_dof_values (int entity_id)
	This function only available from C++ Get the velocity's dof values
const int *	get_velocity_dof_signs (int entity_id)
	This function only available from C++ Get the velocity's dof signs
std::string	get_velocity_combine_type (int entity_id)
	Get the velocity's combine type which is "Overwrite", "Average", "SmallestCombine", or "LargestCombine".
const double *	get_acceleration_dof_values (int entity_id)
	This function only available from C++ Get the acceleration's dof values
const int *	get_acceleration_dof_signs (int entity_id)
	This function only available from C++ Get the acceleration's dof signs
std::string	get_acceleration_combine_type (int entity_id)
	Get the acceleration's combine type which is "Overwrite", "Average", "SmallestCombine", or "LargestCombine".
std::string	get_displacement_combine_type (int entity_id)
	Get the displacement's combine type which is "Overwrite", "Average", "SmallestCombine", or "LargestCombine".
double	get_pressure_value (int entity_id)
	Get the pressure value.
std::string	get_pressure_function (int entity_id)
	Get the pressure function.
double	get_force_magnitude (int entity_id)
	Get the force magnitude from a force.
double	get_moment_magnitude (int entity_id)
	Get the moment magnitude from a force.
std::array< double, 3 >	get_force_direction_vector (int entity_id)
	Get the direction vector from a force.
std::array< double, 3 >	get_force_moment_vector (int entity_id)
	Get the moment vector from a force.
std::string	get_constraint_type (int constraint_id)
	Get the type of a specified constraint.
std::string	get_constraint_reference_point (int constraint_id)
	Get the reference point of a specified constraint.
std::string	get_constraint_dependent_entity_point (int constraint_id)
	Get the dependent entity of a specified constraint.
double	get_material_property (CI_MaterialProperty material_property_enum, int entity_id)
	Get the specified material property value.
int	get_media_property (int entity_id)
	Get the media property value.
std::vector< std::string >	get_material_name_list ()
	Get a list of all defined material names.
std::vector< std::string >	get_media_name_list ()
	Get a list of all defined material names.
std::string	get_material_name (int material_id)
	Get the name of the material (or cfd media) with the given id.
double	calculate_timestep_estimate (std::string entity_type, std::vector< int > entity_ids)
	Calculates time step estimate on elements of/in entity type: "Tet" or "Hex" or "Volume" or "Block" or "Group" The hexes or tets must belong to a single block and that block must have a material assigned to it. That material must have elastic_modulus, poisson_ratio, and density defined.
double	calculate_timestep_estimate_with_props (std::string entity_type, std::vector< int > entity_id_list, double density, double youngs_modulus, double poissons_ratio)
	Calculates time step estimate on elements of/in entity type: "Tet" or "Hex" or "Volume" or "Block" or "Group".
double	get_target_timestep ()
	Returns the target timestep threshold used in the timestep density multiplier metric.
std::vector< std::array< double, 3 > >	snap_locations_to_geometry (const std::vector< std::array< double, 3 > > &locations, std::string entity_type, int entity_id, double tol)
	Snaps xyz locations to closest point on entity. Then snaps to child curves or vertices within given tolerance. Vertices snapped to before curves.
std::vector< double >	measure_between_entities (std::string entity_type1, int entity_id1, std::string entity_type2, int entity_id2)
	returns distance between two geometry entities and their closest points
std::vector< int >	gather_surfaces_by_orientation (std::vector< int > seed_surf_ids, std::vector< int > all_surf_ids)
	Gathers connected surfaces to those in 'seed_surf_ids' that use common curves in an opposite sense. For example, if a surface A in 'seed_surf_ids' uses a curve in the FORWARD sense and it can find surface, B, that uses that same curve in a REVERSED sense, it adds B to the list. The search continues with all of surface B's curves. All the surfaces in 'seed_surf_ids' will be returned. If the user wants to limit the scope of possible surfaces that are searched, 'all_surf_ids' can be populated. If 'all_surf_ids' is empty, all surfaces are candidates. This function can be helpful in finding enclosures when you have a set of non-manifold surfaces.
void	set_label_type (const char *entity_type, int label_flag)
	make calls to SVDrawTool::set_label_type
int	get_label_type (const char *entity_type)
	make calls to SVDrawTool::get_label_type
std::vector< int >	get_coordinate_systems_id_list ()
	get a list of coordinate system ids
std::vector< double >	get_n_largest_distances_between_meshes (int n, std::string entity_type1, std::vector< int > ids1, std::string entity_type2, std::vector< int > ids2)
	Finds the 'n' largest distances between two meshes. These distances are from the nodes on the entities of 'ids1' to the elements in 'ids2'. Only triangle and face (quads) element types are supported. It is assumed that the meshes approximately line up. Each distance is returned with three values:
void	compare_geometry_and_mesh (std::vector< int > volume_ids, std::vector< int > block_ids, std::vector< int > hex_ids, std::vector< int > tet_ids, double tolerance, int &returned_unmatched_volumes_count, int &returned_unmatched_elements_count, std::vector< int > &returned_full_matches_group_ids_list, std::vector< int > &returned_partial_matches_group_ids_list, int &returned_volume_curves_group_id)
	Compare the geometry and mesh.
double	get_dbl_sculpt_default (const char *variable)
	return sculpt default value
int	get_int_sculpt_default (const char *variable)
bool	get_bool_sculpt_default (const char *variable)
std::string	get_string_sculpt_default (const char *variable)
double	get_blunt_tangency_default_depth (int vert_id, double angle, bool add_material)
	get default depth value for blunt tangency operation
std::vector< double >	get_reduce_bolt_core_default_dimensions (int vol_id)
	get default dimensions for reduce vol bolt core operation
double	get_bolt_diameter (int vol_id)
	get diameter of bolt shank
std::vector< double >	get_bolt_axis (int vol_id)
	get axis vector of bolt
double	get_bolt_shigley_radius (int vol_id, double angle)
	get the equivalent shigley's frustum radius at the interface surfaces between upper and lower volumes for a bolt
std::vector< std::vector< double > >	get_bolt_coordinate_system (std::string geom_type, int id)
	get the local coordinate system for a bolt (or bolt hole)
std::vector< int >	get_bolt_clamped_members (int vol_id, std::vector< int > nearby_vols)
	return the clamped members associated with a bolt in order: bearing surface member, sandwiched members (if any), threaded member
std::vector< int >	get_bolts_in_clamped_members (std::string geo_type, std::vector< int > clamped_vols)
	return the bolts that are common to the clamped members Note: uses ML classification to determine "bolt" category
std::vector< BoltHoleInfo >	get_bolt_holes_info (std::string geo_type, std::vector< int > clamped_members, double radius_threshold)
	return the pilot hole definitions from a list of volumes. Returns a vector of BoltHole structs
std::vector< std::vector< int > >	get_bolt_holes (std::string geo_type, std::vector< int > clamped_members, double radius_threshold)
	returns the surfaces from upper and lower holes from the specified clamped volumes or blocks. Results can be used directly in the reduce bolt commands.
std::vector< int >	get_2D_sheet_volumes (int vol_id)
	get the 2D sheet volumes associated with this 3D thin volume
int	get_3D_thin_volume (int vol_id)
	get the 3D sheet volume associated with this 2D sheet volume
Boundary Layer Support
int	get_next_boundary_layer_id ()
bool	is_boundary_layer_id_available (int boundary_layer_id)
std::string	get_boundary_layer_algorithm (int boundary_layer_id)
std::vector< int >	get_boundary_layers_by_base (const std::string &base_type, int base_id)
std::vector< int >	get_boundary_layers_by_pair (const std::string &base_type, int base_id, int parent_id)
bool	get_boundary_layer_uniform_parameters (int boundary_layer_id, double &returned_first_row_height, double &returned_growth_factor, int &returned_number_rows)
bool	get_boundary_layer_aspect_first_parameters (int boundary_layer_id, double &returned_first_row_aspect, double &returned_growth_factor, int &returned_number_rows)
bool	get_boundary_layer_aspect_last_parameters (int boundary_layer_id, double &returned_first_row_height, int &returned_number_rows, double &returned_last_row_aspect)
bool	get_boundary_layer_curve_surface_pairs (int boundary_layer_id, std::vector< int > &returned_curve_list, std::vector< int > &returned_surface_list)
bool	get_boundary_layer_surface_volume_pairs (int boundary_layer_id, std::vector< int > &returned_surface_list, std::vector< int > &returned_volume_list)
bool	get_boundary_layer_vertex_intersection_types (std::vector< int > &returned_vertex_list, std::vector< int > &returned_surface_list, std::vector< std::string > &returned_types)
bool	get_boundary_layer_curve_intersection_types (std::vector< int > &returned_curve_list, std::vector< int > &returned_volume_list, std::vector< std::string > &returned_types)
bool	get_boundary_layer_continuity (int boundary_layer_id)
std::vector< int >	get_boundary_layer_id_list ()
std::vector< int >	sizing_source_ids ()
	Functions to support sizing source sizing function.
double	sizing_source_min_size ()
double	sizing_source_max_size ()
std::array< double, 3 >	sizing_source_scale (int id)
std::array< double, 3 >	sizing_source_rotation_vector (int id)
double	sizing_source_rotation_angle (int id)
std::array< double, 3 >	sizing_source_origin (int id)
double	sizing_source_size (int id)
double	sizing_source_growth_factor (int id)
void	set_capture_color (bool is_captured, std::array< double, 4 > color)
void	draw_curve_capture (const std::string &geometry_type, const std::vector< int > &ids, bool is_captured)
void	draw_curve_capture_from_size (const std::string &geometry_type, const std::vector< int > &ids, double percent_captured, double mesh_size)
std::vector< CFD_BC_Entity >	get_all_cfd_bcs ()
std::vector< AssemblyItem >	get_assembly_items ()
std::vector< AssemblyItem >	get_top_level_assembly_items ()
std::vector< AssemblyItem >	get_assembly_children (int assembly_id)
std::vector< int >	get_volumes_for_node (std::string node_name, int node_instance)
std::vector< MeshErrorFeedback * >	get_mesh_errors ()
int	get_mesh_error_count ()
Geometry from ids
CubitInterface::Body	body (int id_in)
	Gets the body object from an ID.
CubitInterface::Volume	volume (int id_in)
	Gets the volume object from an ID.
CubitInterface::Surface	surface (int id_in)
	Gets the surface object from an ID.
CubitInterface::Curve	curve (int id_in)
	Gets the curve object from an ID.
CubitInterface::Vertex	vertex (int id_in)
	Gets the vertex object from an ID.
void	reset ()
	Executes a reset within cubit.
Geometry Creation Functions
Body	brick (double width, double depth=-1, double height=-1)
	Creates a brick of specified width, depth, and height.
Body	sphere (double radius, int x_cut=0, int y_cut=0, int z_cut=0, double inner_radius=0)
	Creates all or part of a sphere.
Body	prism (double height, int sides, double major, double minor)
	Creates a prism of the specified dimensions.
Body	pyramid (double height, int sides, double major, double minor, double top=0.0)
	Creates a pyramid of the specified dimensions.
Body	cylinder (double height, double x_radius, double y_radius, double top_radius)
	creates a cylinder of the specified dimensions
Body	torus (double center_radius, double swept_radius)
	creates a torus of the specified dimensions
Vertex	create_vertex (double x=0, double y=0, double z=0)
	Creates a vertex at a x,y,z.
Curve	create_curve (Vertex v0, Vertex v1)
	Creates a curve between two vertices.
Curve	create_arc_curve (Vertex v0, Vertex v1, std::array< double, 3 > intermediate_point)
	Creates a arc curve using end vertices and an intermediate point.
Curve	create_spline (std::vector< std::array< double, 3 > > points, int surface_id)
	create spline through the given 3d points
Body	create_surface (std::vector< Curve > curves)
	Creates a surface from boundary curves.
std::vector< Body >	sweep_curve (std::vector< Curve > curves, std::vector< Curve > along_curves, double draft_angle=0, int draft_type=0, bool rigid=false)
	Create a Body or a set of Bodies from a swept curve.
Body	copy_body (Body init_body)
	Creates a copy of the input Body.
Geometry Manipulation Functions
std::vector< Body >	tweak_surface_offset (std::vector< Surface > surfaces, std::vector< double > distances)
	Performs a tweak surface offset command.
std::vector< CubitInterface::Body >	tweak_surface_remove (std::vector< Surface > surfaces, bool extend_ajoining=true, bool keep_old=false, bool preview=false)
	Removes a surface from a body and extends the surrounding surfaces if extend_ajoining is true.
std::vector< CubitInterface::Body >	tweak_curve_remove (std::vector< Curve > curves, bool keep_old=false, bool preview=false)
	Removes a curve from a body and extends the surrounding surface to fill the gap.
std::vector< Body >	tweak_curve_offset (std::vector< Curve > curves, std::vector< double > distances, bool keep_old=false, bool preview=false)
	Performs a tweak curve offset command.
std::vector< Body >	tweak_vertex_fillet (std::vector< Vertex > verts, double radius, bool keep_old=false, bool preview=false)
	Performs a tweak vertex fillet command.
std::vector< Body >	subtract (std::vector< CubitInterface::Body > tool_in, std::vector< CubitInterface::Body > from_in, bool imprint_in=false, bool keep_old_in=false)
	Performs a boolean subtract operation.
std::vector< Body >	unite (std::vector< CubitInterface::Body > body_in, bool keep_old_in=false)
	Performs a boolean unite operation.
void	move (Entity entity, std::array< double, 3 > vector, bool preview=false)
	Moves the Entity the specified vector.
void	scale (Entity entity, double factor, bool preview=false)
	Scales the Entity according to the specified factor.
void	reflect (Entity entity, std::array< double, 3 > axis, bool preview=false)
	Reflect the Entity about the specified axis.
void	set_nodal_variable (std::vector< int > node_ids, std::string variable_name, std::vector< double > variables)
	Sets nodal variables.
void	set_element_variable (std::vector< int > element_ids, std::string variable_name, std::vector< double > variables)
	Sets element variables.
Machine Learning Support
bool	load_ML (std::string model_type="all")
	load the machine learning training data
void	unload_ML (std::string model_type="all")
	unload the machine learning training data
std::vector< std::vector< double > >	get_ML_operation_features (std::vector< std::string > ml_op_names, std::vector< size_t > entity1_ids, std::vector< size_t > entity2_ids, std::vector< std::vector< double > > params, double mesh_size, bool reduced_features=false)
	get machine learning features for a list of cubit operations
std::vector< std::vector< double > >	get_ML_predictions (std::vector< std::string > ml_op_names, std::vector< size_t > entity1_ids, std::vector< size_t > entity2_ids, std::vector< std::vector< double > > params, double mesh_size, bool reduced_features=false)
	get machine learning predictions for the list of operations and corresponding entities. This function will load the ML training data if not already loaded. It will first compute features and then run predictions from training data. Uses scikit-learn EDT (Ensembles of Decision Trees) for predictions
std::string	get_ML_classification (std::string geom_type, size_t ent_id)
	return the name of the classification category for this surface or volume. uses same methods as get_ML_predictions for volume_no_op or classify_surface. Same as calling get_ML_operation_features + get_ML_predictions with volume_no_op and classify_surface, but returns category with highest probablity.
std::vector< std::string >	get_ML_classifications (std::string geom_type, std::vector< size_t > ent_ids)
	same as get_ML_classification, but classifies multiple volumes or surfaces with a single call (more efficient)
std::vector< std::string >	get_ML_classification_categories (std::string geom_type)
	return a list of strings representing all possible calssification categories for volumes or surfaces
bool	ML_train (std::string geom_type)
	force a new training. Currently implemented for only classification methods, volume_no_op and surface_no_op.
std::vector< std::string >	get_ML_operation_feature_types (const std::string ml_op_name, bool reduced_features=false)
	for the given operation type described by get_ML_operation_features, return a vector of strings indicating the type of data for each feature in the vector. Will return one of the following for each index:
std::vector< std::string >	get_ML_operation_feature_names (const std::string ml_op_name, bool reduced_features=false)
	for the given operation type described by get_ML_operation_features, return a vector of strings indicating the name of data for each feature in the vector.
int	get_ML_operation_feature_size (const std::string ml_op_name, const bool reduced_features=false)
	for the given operation type described by get_ML_operation_features, return the expected size of the feature vector
int	get_ML_operation_label_size (const std::string ml_op_name)
	for the given operation type return length of label vector the expected size of the feature vector
std::vector< std::string >	get_ML_classification_models ()
	get the available classification ML model names
std::vector< std::string >	get_ML_regression_models ()
	get the available regression ML model names
int	get_ML_model_ID (std::string)
	get a unique ID for the given operation/model name
std::string	get_ML_model_name (int model_ID)
	get the name for the given operation/model ID
std::vector< std::string >	get_ML_operation (const std::string op_name, const size_t entity_id1, const size_t entity_id2, const std::vector< double > params, const double small_curve_size, const double mesh_size)
	get the command, display and preview strings for a given ML operation type
std::vector< double >	get_ML_feature_importances (const std::string op_name)
	return the vector of feature importances for a given operation type
double	get_ML_feature_distance (const std::string op_name, std::vector< double > &f1, std::vector< double > &f2)
	feature distance is defined as a weighted distance between two feature vectors of the same size. Features are weighted on EDT (ensembles of decision trees) importance values.
void	set_ML_base_user_dir (const std::string path, const bool print_info=false)
	set the path to any user training data. (classification only)

CubitInterface Control
const int	CI_ERROR = -1
void	init (const std::vector< std::string > &argv)
	Use init to initialize Cubit. Using a blank list as the input parameter is acceptable.
int	destroy ()
	Closes the current journal file.
void	ensure_init ()
void	report_usage ()
void	process_input_files ()
	C++ only
void	enable_signal_handling (bool on)
	initialize/uninitialize signal handling C++ only
void	print_info (const std::string &message)
	Print a message using the cubit message handler.
void	set_cubit_message_handler (CubitMessageHandler *hdlr)
	redirect the output from cubit.
CubitMessageHandler *	get_cubit_message_handler ()
	get the default message handler
void	set_exit_handler (ExternalExitHandler *hdlr)
	Set the exit handler.

Detailed Description

Function Documentation

◆ add_entities_to_group()

◆ add_entity_to_group()

◆ add_filename_to_recent_file_list()

◆ add_filter_type()

◆ are_adjacent_curves()

◆ are_adjacent_surfaces()

◆ auto_size_needs_to_be_calculated()

◆ best_edge_to_collapse_interior_node()

◆ body()

◆ brick()

◆ calculate_timestep_estimate()

◆ calculate_timestep_estimate_with_props()

◆ clear_drawing_set()

◆ clear_highlight()

◆ clear_picked_list()

◆ clear_preview()

◆ cmd()

◆ cmd_single()

◆ command_is_python_mode()

◆ compare_geometry_and_mesh()

◆ complete_filename()

◆ contains_virtual()

◆ convection_is_on_shell_area()

◆ convection_is_on_solid()

◆ copy_body()

◆ create_arc_curve()

◆ create_curve()

◆ create_new_group()

◆ create_spline()

◆ create_surface()

◆ create_vertex()

◆ cubit_or_python_cmd()

◆ cubit_or_python_cmds()

◆ cubit_or_python_cmds_as_file()

◆ current_selection_count()

◆ curve()

◆ cylinder()

◆ delete_all_groups()

◆ delete_group()

◆ destroy()

◆ developer_commands_are_enabled()

◆ draw_curve_capture()

◆ draw_curve_capture_from_size()

◆ enable_signal_handling()

◆ ensure_init()

◆ entity_exists()

◆ estimate_curve_mesh_size()

◆ estimate_curves_mesh_size()

◆ estimate_merge_tolerance()

◆ estimate_morph_num_procs()

◆ estimate_morph_tet_element_count()

◆ evaluate_exterior_angle()

◆ evaluate_exterior_angle_at_curve()

◆ evaluate_surface_angle_at_vertex()

◆ exodus_sizing_function_file_exists()

◆ find_floating_volumes()

◆ find_nonmanifold_curves()

◆ find_nonmanifold_vertices()

◆ flush_graphics()

◆ gather_surfaces_by_orientation()

◆ get_2D_sheet_volumes()

◆ get_3D_thin_volume()

◆ get_acceleration_combine_type()

◆ get_acceleration_dof_signs()

◆ get_acceleration_dof_values()

◆ get_acis_version()

◆ get_acis_version_as_int()

◆ get_adjacent_surfaces()

◆ get_adjacent_volumes()

◆ get_all_cfd_bcs()

◆ get_all_exodus_times()

◆ get_all_exodus_variable_names()

◆ get_all_geometric_owners()

◆ get_all_ids_from_name()

◆ get_aprepro_numeric_value()

◆ get_aprepro_value()

◆ get_aprepro_value_as_string()

◆ get_aprepro_vars()

◆ get_arc_length()

◆ get_assembly_children()

◆ get_assembly_classification_category()

◆ get_assembly_classification_level()

◆ get_assembly_description()

◆ get_assembly_file_format()

◆ get_assembly_instance()

◆ get_assembly_items()

◆ get_assembly_level()

◆ get_assembly_material_description()

◆ get_assembly_material_specification()

◆ get_assembly_metadata()

◆ get_assembly_name()

◆ get_assembly_path()

◆ get_assembly_type()

◆ get_assembly_units()

◆ get_assembly_weapons_category()

◆ get_auto_size()

◆ get_bad_geometry()

◆ get_bc_id_list()

◆ get_bc_name()

◆ get_bc_temperature()

◆ get_blend_chain_collections()

◆ get_blend_chains()

◆ get_blend_surfaces()

◆ get_block_attribute_count()

◆ get_block_attribute_name()

◆ get_block_attribute_value()

◆ get_block_children()

◆ get_block_count()

◆ get_block_curves()

◆ get_block_edges()

◆ get_block_element_attribute_count()

◆ get_block_element_attribute_names()

◆ get_block_element_type()

◆ get_block_elements_and_nodes()

◆ get_block_faces()

◆ get_block_hexes()

◆ get_block_id()

◆ get_block_id_list()

◆ get_block_ids()

◆ get_block_material()

◆ get_block_nodes()

◆ get_block_pyramids()

◆ get_block_surfaces()

◆ get_block_tets()

◆ get_block_tris()

◆ get_block_vertices()

◆ get_block_volumes()

◆ get_block_wedges()

◆ get_blocks_with_materials()

◆ get_blunt_tangency_default_depth()

◆ get_body_count()

◆ get_bolt_axis()

◆ get_bolt_clamped_members()

◆ get_bolt_coordinate_system()

◆ get_bolt_diameter()

◆ get_bolt_holes()

◆ get_bolt_holes_info()

◆ get_bolt_shigley_radius()

◆ get_bolts_in_clamped_members()

◆ get_bool_sculpt_default()

◆ get_boundary_layer_algorithm()

◆ get_boundary_layer_aspect_first_parameters()

◆ get_boundary_layer_aspect_last_parameters()

◆ get_boundary_layer_continuity()

◆ get_boundary_layer_curve_intersection_types()

◆ get_boundary_layer_curve_surface_pairs()

◆ get_boundary_layer_id_list()

◆ get_boundary_layer_surface_volume_pairs()

◆ get_boundary_layer_uniform_parameters()

◆ get_boundary_layer_vertex_intersection_types()

◆ get_boundary_layers_by_base()

◆ get_boundary_layers_by_pair()

◆ get_bounding_box()

◆ get_build_number()

◆ get_cavity_surfaces()

◆ get_center_point()

◆ get_cfd_type()

◆ get_chamfer_chain_collections()

◆ get_chamfer_chains()

◆ get_chamfer_surfaces()

◆ get_close_loop_thickness()

◆ get_close_loops()

◆ get_close_loops_with_thickness()

◆ get_close_vertex_curve_pairs()

◆ get_closed_narrow_surfaces()

◆ get_closest_node()

◆ get_closest_vertex_curve_pairs()

◆ get_coincident_entity_pairs()

◆ get_coincident_vertex_curve_pairs()

◆ get_coincident_vertex_surface_pairs()

◆ get_coincident_vertex_vertex_pairs()

◆ get_coincident_vertices()

◆ get_command_from_history()

◆ get_command_history_count()

◆ get_common_curve_id()

◆ get_common_vertex_id()

◆ get_cone_surfaces()

◆ get_connected_surfaces()

◆ get_connectivity()

◆ get_constraint_dependent_entity_point()

◆ get_constraint_reference_point()

◆ get_constraint_type()

◆ get_contact_pair_exterior_state()

◆ get_contact_pair_friction_value()

◆ get_contact_pair_general_state()

◆ get_contact_pair_tied_state()

◆ get_contact_pair_tol_lower_value()

◆ get_contact_pair_tolerance_value()

◆ get_continuous_curves()

◆ get_continuous_surfaces()

◆ get_convection_coefficient()

◆ get_coordinate_systems_id_list()

◆ get_copy_block_on_geometry_copy_setting()

◆ get_copy_nodeset_on_geometry_copy_setting()

◆ get_copy_sideset_on_geometry_copy_setting()

◆ get_cubit_digits_setting()

◆ get_cubit_message_handler()

◆ get_current_ids()

◆ get_current_journal_file()

◆ get_curve_bias_coarse_size()

◆ get_curve_bias_fine_size()

◆ get_curve_bias_first_interval_fraction()

◆ get_curve_bias_first_interval_length()

◆ get_curve_bias_first_last_ratio1()

◆ get_curve_bias_first_last_ratio2()

◆ get_curve_bias_from_start()

◆ get_curve_bias_from_start_set()

◆ get_curve_bias_geometric_factor()

◆ get_curve_bias_geometric_factor2()

◆ get_curve_bias_last_first_ratio1()

◆ get_curve_bias_last_first_ratio2()

◆ get_curve_bias_start_vertex_id()

◆ get_curve_bias_type()

◆ get_curve_center()

◆ get_curve_count()

◆ get_curve_count_in_volumes()

◆ get_curve_edges()

◆ get_curve_length()

◆ get_curve_mesh_scheme_curvature()

◆ get_curve_mesh_scheme_pinpoint_locations()

◆ get_curve_mesh_scheme_stretch_values()

◆ get_curve_nodes()

◆ get_curve_radius()

◆ get_curve_type()

◆ get_dbl_sculpt_default()

◆ get_default_auto_size()

◆ get_default_element_type()

◆ get_default_geometry_engine()

◆ get_displacement_combine_type()

◆ get_displacement_dof_signs()

◆ get_displacement_dof_values()

◆ get_distance_between()

◆ get_distance_between_entities()

◆ get_distance_from_curve_start()

◆ get_edge_count()

◆ get_edge_global_element_id()

◆ get_edges_to_swap()

◆ get_elem_quality_stats()

◆ get_element_block()

◆ get_element_budget()

◆ get_element_count()

◆ get_element_exists()

◆ get_element_type()

◆ get_element_type_id()

◆ get_entities()

◆ get_entity_color()

◆ get_entity_color_index()

◆ get_entity_modeler_engine()

◆ get_entity_name()

◆ get_entity_names()

◆ get_entity_sense()

◆ get_error_count()

◆ get_exodus_element_count()

◆ get_exodus_entity_description()

◆ get_exodus_entity_name()

◆ get_exodus_entity_type()

◆ get_exodus_id()

◆ get_exodus_sizing_function_file_name()

◆ get_exodus_sizing_function_variable_name()

◆ get_exodus_variable_count()

◆ get_exodus_variable_names()

◆ get_exodus_version()

◆ get_expanded_connectivity()

◆ get_force_direction_vector()

◆ get_force_magnitude()

◆ get_force_moment_vector()

◆ get_gaps_between_volumes()

◆ get_geometric_owner()

◆ get_geometry_node_count()

◆ get_geometry_owner()

◆ get_global_element_id()

◆ get_graphics_version()

◆ get_group_bodies()

◆ get_group_children()

◆ get_group_curves()

◆ get_group_edges()

◆ get_group_groups()

◆ get_group_hexes()

◆ get_group_nodes()

◆ get_group_pyramids()

◆ get_group_quads()

◆ get_group_spheres()

◆ get_group_surfaces()

◆ get_group_tets()

◆ get_group_tris()

◆ get_group_vertices()

◆ get_group_volumes()

◆ get_group_wedges()

◆ get_heatflux_on_area()

◆ get_hex_count()

◆ get_hex_global_element_id()

◆ get_hex_sheet()

◆ get_hole_surfaces()

◆ get_hydraulic_radius_surface_area()

◆ get_hydraulic_radius_volume_area()

◆ get_id_from_name()

◆ get_id_string()

◆ get_idless_signature()

◆ get_idless_signatures()

◆ get_int_sculpt_default()

◆ get_interface()

◆ get_label_type()

◆ get_last_id()

◆ get_list_of_free_ref_entities()

◆ get_material_name()

◆ get_material_name_list()

◆ get_material_property()

◆ get_media_name_list()

◆ get_media_property()

◆ get_merge_setting()

◆ get_merge_tolerance()

◆ get_mergeable_curves()

◆ get_mergeable_entities()

◆ get_mergeable_surfaces()

◆ get_mergeable_vertices()

◆ get_mesh_edge_length()

◆ get_mesh_element_type()

◆ get_mesh_error_count()

◆ get_mesh_error_solutions()

◆ get_mesh_errors()

◆ get_mesh_geometry_approximation_angle()

◆ get_mesh_group_parent_ids()

◆ get_mesh_interval_firmness()

◆ get_mesh_intervals()

◆ get_mesh_scheme()

◆ get_mesh_scheme_firmness()

◆ get_mesh_size()

◆ get_mesh_size_type()

◆ get_meshed_volume_or_area()

◆ get_meshgems_version()

◆ get_ML_classification()

◆ get_ML_classification_categories()

◆ get_ML_classification_models()

◆ get_ML_classifications()

◆ get_ML_feature_distance()

◆ get_ML_feature_importances()

◆ get_ML_model_ID()

◆ get_ML_model_name()

◆ get_ML_operation()

◆ get_ML_operation_feature_names()

◆ get_ML_operation_feature_size()

◆ get_ML_operation_feature_types()

◆ get_ML_operation_features()

◆ get_ML_operation_label_size()

◆ get_ML_predictions()

◆ get_ML_regression_models()

◆ get_moment_magnitude()

◆ get_n_largest_distances_between_meshes()

◆ get_narrow_regions()

◆ get_narrow_surfaces()

◆ get_nearby_volumes_at_volume()

◆ get_next_block_id()

◆ get_next_boundary_layer_id()

◆ get_next_command_from_history()

◆ get_next_group_id()

◆ get_next_nodeset_id()

◆ get_next_sideset_id()

◆ get_nodal_coordinates()

◆ get_node_constraint()

◆ get_node_constraint_smart_metric()

◆ get_node_constraint_smart_threshold()

◆ get_node_constraint_value()

◆ get_node_count()

◆ get_node_edges()

◆ get_node_exists()

◆ get_node_faces()

◆ get_node_global_id()

◆ get_node_position_fixed()

◆ get_node_tris()

◆ get_nodeset_children()

◆ get_nodeset_count()

◆ get_nodeset_curves()

◆ get_nodeset_id_list()

◆ get_nodeset_id_list_for_bc()

◆ get_nodeset_node_count()

◆ get_nodeset_nodes()

◆ get_nodeset_nodes_inclusive()

◆ get_nodeset_surfaces()

◆ get_nodeset_vertices()

◆ get_nodeset_volumes()

◆ get_num_volume_shells()

◆ get_overlap_max_angle()

◆ get_overlap_max_gap()

◆ get_overlap_min_gap()

◆ get_overlapping_curves()

◆ get_overlapping_surfaces()

◆ get_overlapping_surfaces_at_surface()

◆ get_overlapping_surfaces_in_bodies()

◆ get_overlapping_surfaces_in_volumes()

◆ get_overlapping_volumes()

◆ get_overlapping_volumes_at_volume()

◆ get_owning_body()

◆ get_owning_volume()

◆ get_owning_volume_by_name()

◆ get_owning_volume_ids()

◆ get_parent_assembly_instance()

◆ get_parent_assembly_path()

◆ get_periodic_data()

◆ get_pick_filters()

◆ get_pick_type()

◆ get_pressure_function()

◆ get_pressure_value()

◆ get_previous_command_from_history()

◆ get_pyramid_count()

◆ get_pyramid_global_element_id()

◆ get_python_version()

◆ get_quad_count()

◆ get_quad_global_element_id()

◆ get_quality_stats()

◆ get_quality_stats_at_geometry()

◆ get_quality_value()

◆ get_quality_values()

◆ get_reduce_bolt_core_default_dimensions()

◆ get_relatives()

◆ get_rendering_mode()

◆ get_requested_mesh_interval_firmness()

◆ get_requested_mesh_intervals()

◆ get_requested_mesh_size()

◆ get_requested_mesh_size_type()

◆ get_revision_date()

◆ get_rubberband_shape()

◆ get_selected_id()

◆ get_selected_ids()

◆ get_selected_type()

◆ get_sharp_angle_vertices()

◆ get_sharp_curve_angles()

◆ get_sharp_surface_angles()

◆ get_sideset_area()

◆ get_sideset_children()

◆ get_sideset_count()

◆ get_sideset_curves()

◆ get_sideset_edges()

◆ get_sideset_element_type()

◆ get_sideset_id_list()

◆ get_sideset_id_list_for_bc()

◆ get_sideset_quads()

◆ get_sideset_surfaces()

◆ get_sideset_tris()

◆ get_similar_curves()

◆ get_similar_surfaces()

◆ get_similar_volumes()

◆ get_sizing_function_name()

◆ get_small_and_narrow_surfaces()

◆ get_small_curves()

◆ get_small_radius_blend_surfaces()

◆ get_small_surfaces()

◆ get_small_surfaces_HR()

◆ get_small_surfaces_hydraulic_radius()

◆ get_small_volumes()

◆ get_small_volumes_hydraulic_radius()

◆ get_smallest_curves()

◆ get_smallest_features()

◆ get_smooth_scheme()

◆ get_solutions_for_bad_geometry()

◆ get_solutions_for_blends()

◆ get_solutions_for_bolt()

◆ get_solutions_for_bolt_hole()

◆ get_solutions_for_cavity_surface()

◆ get_solutions_for_classified_surface()

◆ get_solutions_for_classified_volume()

◆ get_solutions_for_close_loop()

◆ get_solutions_for_cone_surface()

◆ get_solutions_for_decomposition()

◆ get_solutions_for_forced_sweepability()

◆ get_solutions_for_imprint_merge()

◆ get_solutions_for_near_coincident_vertex_and_curve()

◆ get_solutions_for_near_coincident_vertex_and_surface()

◆ get_solutions_for_near_coincident_vertices()

◆ get_solutions_for_overlapping_surfaces()

◆ get_solutions_for_overlapping_volumes()

◆ get_solutions_for_sharp_angle_vertex()

◆ get_solutions_for_sheet_volume_connection()

◆ get_solutions_for_sheet_volumes()

◆ get_solutions_for_small_curves()

◆ get_solutions_for_small_surfaces()

◆ get_solutions_for_source_target()

◆ get_solutions_for_surfaces_with_narrow_regions()

◆ get_solutions_for_thin_volume()

◆ get_solutions_for_volumes()

◆ get_source_surfaces()

◆ get_sphere_count()

◆ get_sphere_global_element_id()

◆ get_string_sculpt_default()

◆ get_sub_elements()

◆ get_submap_corner_types()

◆ get_surface_area()

◆ get_surface_cavity_collections()

◆ get_surface_centroid()

◆ get_surface_count()

◆ get_surface_element_count()

◆ get_surface_hole_collections()

◆ get_surface_loop_nodes()

◆ get_surface_nodes()

◆ get_surface_normal()

◆ get_surface_normal_at_coord()

◆ get_surface_num_loops()

◆ get_surface_principal_curvatures()

◆ get_surface_quads()

◆ get_surface_sense()

◆ get_surface_tris()

◆ get_surface_type()

◆ get_surfs_with_narrow_regions()

◆ get_tangential_intersections()

◆ get_target_surfaces()

◆ get_target_timestep()

◆ get_tet_count()

◆ get_tet_global_element_id()

◆ get_tetmesh_growth_factor()

◆ get_tetmesh_insert_mid_nodes()

◆ get_tetmesh_minimize_interior_points()

◆ get_tetmesh_minimize_slivers()

◆ get_tetmesh_num_anisotropic_layers()

◆ get_tetmesh_optimization_level()

◆ get_tetmesh_optimize_mid_nodes()

◆ get_tetmesh_optimize_overconstrained_edges()

◆ get_tetmesh_optimize_overconstrained_tets()

◆ get_tetmesh_parallel()

◆ get_tetmesh_proximity_flag()

◆ get_tetmesh_proximity_layers()

◆ get_tetmesh_relax_surface_constraints()

◆ get_tight_bounding_box()

◆ get_top_level_assembly_items()

◆ get_total_bounding_box()

◆ get_total_volume()

◆ get_tri_count()

◆ get_tri_global_element_id()

◆ get_trimesh_geometry_sizing()

◆ get_trimesh_num_anisotropic_layers()

◆ get_trimesh_ridge_angle()

◆ get_trimesh_split_overconstrained_edges()

◆ get_trimesh_surface_gradation()

◆ get_trimesh_surface_proximity_ratio()

◆ get_trimesh_target_min_size()

◆ get_trimesh_tiny_edge_length()

◆ get_trimesh_use_surface_proximity()

◆ get_trimesh_volume_gradation()

◆ get_undo_enabled()

◆ get_unmerged_curves_on_shells()

◆ get_valence()

◆ get_valid_block_element_types()

◆ get_velocity_combine_type()

◆ get_velocity_dof_signs()

◆ get_velocity_dof_values()

◆ get_version()

◆ get_vertex_count()

◆ get_vertex_node()

◆ get_vertex_type()

◆ get_view_at()

◆ get_view_distance()

◆ get_view_from()

◆ get_view_up()

◆ get_vol_sphere_params()

◆ get_volume_area()

◆ get_volume_count()

◆ get_volume_element_count()

◆ get_volume_gap_solutions()

◆ get_volume_gaps()

◆ get_volume_hexes()

◆ get_volume_nodes()

◆ get_volume_pyramids()

◆ get_volume_tets()

◆ get_volume_volume()

◆ get_volume_wedges()

◆ get_volumes_for_node()

◆ get_wedge_count()

◆ get_wedge_global_element_id()

◆ get_wrt_entity()

◆ group_list()

◆ group_names_ids()

◆ has_valid_size()

◆ heatflux_is_on_shell_area()

◆ highlight()

◆ init()

◆ is_acis_engine_available()

◆ is_assembly_metadata_attached()

◆ is_blend_surface()

◆ is_boundary_layer_id_available()

◆ is_catia_engine_available()

◆ is_cavity_surface()

◆ is_chamfer_surface()

◆ is_close_loop_surface()

◆ is_command_echoed()

◆ is_command_journaled()

◆ is_cone_surface()

◆ is_continuous_surface()

◆ is_cylinder_surface()

◆ is_geometry_visibility_on()

◆ is_hole_surface()

◆ is_interval_count_odd()

◆ is_merged()

◆ is_mesh_element_in_group()

◆ is_mesh_visibility_on()

◆ is_meshed()

◆ is_modified()

◆ is_multi_volume()

◆ is_narrow_surface()

◆ is_occlusion_on()

◆ is_on_thin_shell()

◆ is_opencascade_engine_available()

◆ is_part_of_list()

◆ is_performing_undo()

◆ is_periodic()

◆ is_perspective_on()

◆ is_playback_paused()

◆ is_playback_paused_on_error()

◆ is_point_contained()

◆ is_scale_visibility_on()

◆ is_select_partial_on()

◆ is_sheet_body()

◆ is_surface_meshable()

◆ is_surface_planar()

◆ is_surface_planer()

◆ is_type_filtered()

◆ is_undo_save_needed()

◆ is_virtual()

◆ is_visible()

◆ is_volume_meshable()

◆ is_working_dir_set()

◆ journal_commands()

◆ load_ML()

◆ measure_between_entities()

◆ ML_train()

◆ move()

◆ number_undo_commands()

◆ override_journal_stream()

◆ parse_cubit_list()

◆ parse_locations()

◆ pause_playback()

◆ plugin_manager()

◆ print_cmd_options()

◆ print_current_selections()

◆ print_currently_selected_entity()

◆ print_info()

◆ print_raw_help()

◆ print_surface_summary_stats()

◆ print_volume_summary_stats()

◆ prism()

◆ process_input_files()

◆ project_unit_square()

◆ pyramid()

◆ reflect()

◆ release_interface()

◆ remove_entity_from_group()

◆ remove_filter_type()

◆ replace_progress_handler()

◆ report_usage()

◆ reset()

◆ reset_camera()

◆ resume_playback()

◆ scale()

◆ set_capture_color()

◆ set_copy_block_on_geometry_copy_setting()

◆ set_copy_nodeset_on_geometry_copy_setting()

◆ set_copy_sideset_on_geometry_copy_setting()

◆ set_cubit_interrupt()

◆ set_cubit_message_handler()

◆ set_element_variable()

◆ set_entity_name()

◆ set_exit_handler()

◆ set_filter_types()

◆ set_label_type()

◆ set_max_group_id()

◆ set_ML_base_user_dir()

◆ set_modified()

◆ set_nodal_variable()

◆ set_overlap_max_angle()

◆ set_overlap_max_gap()

◆ set_overlap_min_gap()

◆ set_pick_type()

◆ set_playback_paused_on_error()

◆ set_progress_handler()

◆ set_rendering_mode()

◆ set_undo_saved()

◆ silent_cmd()

◆ sizing_source_growth_factor()

◆ sizing_source_ids()

◆ sizing_source_max_size()

◆ sizing_source_min_size()

◆ sizing_source_origin()

◆ sizing_source_rotation_angle()

◆ sizing_source_rotation_vector()

◆ sizing_source_scale()

◆ sizing_source_size()

◆ snap_locations_to_geometry()

◆ sphere()

◆ step_next_possible_selection()

◆ step_previous_possible_selection()

◆ stop_playback()

◆ string_from_id_list()

◆ subtract()

◆ surface()

◆ sweep_curve()

◆ temperature_is_on_shell_area()

◆ temperature_is_on_solid()

◆ torus()

◆ tweak_curve_offset()

◆ tweak_curve_remove()

◆ tweak_surface_offset()

◆ tweak_surface_remove()

◆ tweak_vertex_fillet()

◆ unite()

◆ unload_ML()

◆ unselect_entity()

◆ vertex()

◆ volume()

◆ volume_contains_tets()

◆ was_last_cmd_undoable()

◆ write_to_journal()

Variable Documentation

◆ CI_ERROR